MSRD620CT, NRVSRD620VCT, SSRD8620CT Series Switch-mode Soft Ultrafast Recovery www.onsemi.com Reverse Polarity Power SOFT ULTRAFAST Rectifier REVERSE POLARITY Stateoftheart geometry features epitaxial construction with RECTIFIER glass passivation. Ideally suited for low voltage, high frequency switching power supplies, free wheeling diode and polarity 6.0 AMPERES, 200 VOLTS protection diodes. Features Soft Ultrafast Recovery Matched Dual Die Construction May Be Paralleled for High DPAK Current Output CASE 369C Short Heat Sink Tab Manufactured Not Sheared Epoxy Meets UL 94 V0 0.125 in. 1 NRVSRD and SSRD8 Prefixes for Automotive and Other 4 Applications Requiring Unique Site and Control Change 3 Requirements AECQ101 Qualified and PPAP Capable These Devices are PbFree and are RoHS Compliant* MARKING DIAGRAM AYWW Mechanical Characteristics S Case: Epoxy, Molded 620RG Weight: 0.4 Grams (Approximately) A = Assembly Location Finish: All External Surfaces Corrosion Resistant and Terminal Y = Year Leads are Readily Solderable WW = Work Week Lead and Mounting Surface Temperature for Soldering Purposes: G = PbFree Package 260C Max. for 10 Seconds ESD Ratings: ORDERING INFORMATION Machine Model = C Human Body Model = 2 Device Package Shipping MSRD620CTRG DPAK 75 Units/Rail (PbFree) SSRD8620CTRG DPAK 75 Units/Rail (PbFree) MSRD620CTT4RG DPAK 2,500 / (PbFree) Tape & Reel NRVSRD620VCTT4RG DPAK 2,500 / (PbFree) Tape & Reel SSRD8620CTT4RG DPAK 2,500 / (PbFree) Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: October, 2016 Rev. 4 MSRD620CTR/DMSRD620CT, NRVSRD620VCT, SSRD8620CT Series MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 200 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I A O (At Rated V , T = 162C) R C Per Leg 3.0 Per Package 6.0 NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) Per Package 45 Storage/Operating Case Temperature T T 65 to +175 C stg, c Operating Junction Temperature T 65 to +175 C J Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal Resistance JunctiontoCase (Note 1) R C/W JC Per Leg 5.0 Thermal Resistance JunctiontoAmbient (Note 1) R C/W JA Per Leg 60 Thermal Resistance JunctiontoAmbient (Note 2) R C/W JA Per Leg 166 2 2 1. Mounted with 700 mm copper pad size (approximately 1 in ) 1 oz FR4 board. 2 2. Mounted with pad size approximately 46 mm copper, 1 oz FR4 board. ELECTRICAL CHARACTERISTICS Rating Symbol Value Unit V V Maximum Instantaneous Forward Voltage (Note 3) T = 25C T = 125C F J J Per Leg 1.15 0.95 (I = 3.0 A) F 1.30 1.15 (I = 6.0 A) F I A Maximum Instantaneous Reverse Current (Note 3) R T = 25C T = 125C J J Per Leg (V = 200 V) 1.0 200 R t ns Maximum Reverse Recovery Time (Note 4) rr Per Leg 75 (V = 30 V, I = 1.0 A, di/dt = 50 A/ s) R F Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width 380 s, Duty Cycle 2%. 4. t measured projecting from 25% of I to ground. rr RM www.onsemi.com 2