DATA SHEET www.onsemi.com 1/2.5-Inch 5 Mp CMOS Digital Image Sensor MT9P031 ILCC48 10x10 CASE 847AA General Description The onsemi MT9P031 is a 1/2.5inch CMOS activepixel digital ORDERING INFORMATION image sensor with an active imaging pixel array of 2592 H x 1944 V. It See detailed ordering and shipping information on page 2 of incorporates sophisticated camera functions on chip such as this data sheet. windowing, column and row skip mode, and snapshot mode. It is programmable through a simple twowire serial interface. Applications The 5 Mp CMOS image sensor features onsemis breakthrough lownoise CMOS imaging technology that achieves CCD image High Resolution Network Cameras quality (based on signaltonoise ratio and lowlight sensitivity) Wide FOV Cameras while maintaining the inherent size, cost, and integration advantages 720 P60 fps Cameras of CMOS. Dome Cameras with Electronic Pan, Tile, and Zoom Table 1. KEY PERFORMANCE PARAMETERS Hybrid Video Cameras with High Parameter Value Resolution Stills Optical Format 1/2.5-inch (4:3) Detailed Feature Extraction for Smart Cameras Active Imager Size 5.70 mm (H) x 4.28 mm (V) 7.13 mm Diagonal Features Active Pixels 2592 H x 1944 V High Frame Rate Pixel Size 2.2 x 2.2 m Superior Low-light Performance Color Filter Array RGB Bayer Pattern Low Dark Current Global Reset Release, which Starts the Shutter Type Global Reset Release (GRR), Snapshot Only Exposure of All Rows Simultaneously Electronic Rolling Shutter (ERS) Bulb Exposure Mode, for Arbitrary Maximum Data Rate / Pixel Clock 96 Mp/s at 96 MHz (2.8 V I/O) Exposure Times 48 Mp/s at 48 MHz (1.8 V I/O) Snapshot Mode to Take Frames on Demand Frame Rate Full Resolution Programmable up to 14 fps Horizontal and Vertical Mirror Image HDTV (640 x 480, Programmable up to 53 fps Column and row skip modes to reduce with binning) image size without reducing fieldofview ADC Resolution 12-bit, On-chip (FOV) Column and Row Binning Modes to Responsivity 1.4 V/lux-sec (550 nm) Improve Image Quality when Resizing Pixel Dynamic Range 70.1 dB Simple Two-wire Serial Interface SNR 38.1 dB MAX Programmable Controls: Gain, Frame Rate, Supply Voltage I/O 1.73.1 V Frame Size, Exposure Digital 1.71.9 V (1.8 V Nominal) Automatic Black Level Calibration Analog 2.63.1 V (2.8 V Nominal) On-chip Phase-Locked Loop (PLL) Power Consumption 381 mW at 14 fps Full Resolution Operating Temperature 30C to +70C Packaging 48-pin iLCC, Die Semiconductor Components Industries, LLC, 2006 1 Publication Order Number: August, 2021 Rev. 11 MT9P031/DMT9P031 Ordering Information Table 2. AVAILABLE PART NUMBERS Part Number Product Description Orderable Product Attribute Description MT9P031D00STCC18BC1200 5 MP 1/3 CIS Die Sales, 200 m Thickness MT9P031D00STMC18BC1200 5 MP 1/3 CIS Die Sales, 200 m Thickness MT9P031I12STCDP 5 MP 1/3 CIS Dry Pack with Protective Film MT9P031I12STCDR 5 MP 1/3 CIS Dry Pack without Protective Film MT9P031I12STCDR1 5 MP 1/3 CIS Dry Pack Single Tray without Protective Film MT9P031I12STCTP 5 MP 1/3 CIS Tape & Reel with Protective Film MT9P031I12STMDP 5 MP 1/3 CIS Dry Pack with Protective Film MT9P031I12STMDP1 5 MP 1/3 CIS Dry Pack Single Tray with Protective Film MT9P031I12STMDR 5 MP 1/3 CIS Dry Pack without Protective Film MT9P031I12STMDR1 5 MP 1/3 CIS Dry Pack Single Tray without Protective Film Description wide range of consumer and industrial applications, The MT9P031 sensor can be operated in its default mode including cell phones, digital still cameras, digital video or programmed by the user for frame size, exposure, gain cameras, and PC cameras.. setting, and other parameters. The default mode outputs a Functional Overview full resolution image at 14 frames per second (fps). The MT9P031 is a progressivescan sensor that generates An onchip analogtodigital converter (ADC) provides a stream of pixel data at a constant frame rate. It uses an 12 bits per pixel. FRAME VALID (FV) and LINE VALID onchip, phaselocked loop (PLL) to generate all internal (LV) signals are output on dedicated pins, along with a pixel clocks from a single master input clock running between clock that is synchronous with valid data. 6and 27MHz. The maximum pixel rate is 96 Mp/s, The MT9P031produces extraordinarily clear, sharp corresponding to a clock rate of 96 MHz. Figure 1 illustrates digital pictures, and its ability to capture both continuous a block diagram of the sensor. video and single frames makes it the perfect choice for a TRIGGER SCLK SDATA Serial SADDR Interface Pixel Array 2752H x 2004V PIXCLK EXTCLK D OUT 11:0 RESET BAR LV STANDBY BAR FV OE STROBE Analog Signal Chain Data Path Figure 1. Block Diagram User interaction with the sensor is through the twowire a row has been read, the data from the columns is sequenced serial bus, which communicates with the array control, through an analog signal chain (providing offset correction analog signal chain, and digital signal chain. The core of the and gain), and then through an ADC. The output from the sensor is a 5 Mp activepixel array. The timing and control ADC is a 12bit value for each pixel in the array. The ADC circuitry sequences through the rows of the array, resetting output passes through a digital processing signal chain and then reading each row in turn. In the time interval (which provides further data path corrections and applies between resetting a row and reading that row, the pixels in digital gain). The pixel data are output at a rate of up to the row integrate incident light. The exposure is controlled 96 Mp/s, in addition to frame and line synchronization by varying the time interval between reset and readout. Once signals. www.onsemi.com 2 Array Control Output