LDO Regulator - Very Low Dropout, CMOS, Bias Rail 1 A NCP139 The NCP139 is a 1 A VLDO equipped with NMOS pass transistor and a separate bias supply voltage (V ). The device provides very BIAS www.onsemi.com stable, accurate output voltage with low noise suitable for space T constrained, noise sensitive applications. In order to optimize performance for battery operated portable applications, the NCP139 MARKING features low I consumption. The WLCSP6 1.2 mm x 0.8 mm Chip DIAGRAM Q Scale package is optimized for use in space constrained applications. WLCSP6, 1.2x0.8 XXM CASE 567MV Features Input Voltage Range: V to 5.5 V OUT XX = Specific Device Code Bias Voltage Range: 3.0 V to 5.5 V M = Month Code Adjustable and Fixed Voltage Version Available Output Voltage Range: 0.4 V to 1.8 V (Fixed) Output Voltage Range: 0.5 V to 3.0 V (Adjustable) PIN CONNECTIONS 1% Accuracy over Temperature, 0.5% V 25C OUT 12 UltraLow Dropout: Typ. 50 mV at 1 A Very Low Bias Input Current of Typ. 35 A A VOUT VIN Very Low Bias Input Current in Disable Mode: Typ. 0.5 A Logic Level Enable Input for ON/OFF Control Output Active Discharge Option Available Stable with a 10 F Ceramic Capacitor B SNS/FB EN Available in WLCSP6 1.2 mm x 0.8 mm, 0.4 mm pitch Package These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant C GND VBIAS Typical Applications Batterypowered Equipment Top View Smartphones, Tablets Cameras, DVRs, STB and Camcorders ORDERING INFORMATION See detailed ordering, marking and shipping information on page 7 of this data sheet. V V BIAS BIAS 3.0 V 3.0 V V V OUT OUT 1 F NCP139 ADJ 0.9 V up to 1 Adc, 1 F NCP139 0.9 V up to 1 Adc, 1.3 A peaks 1.3 A peaks BIAS BIAS OUT OUT R1 V IN V IN IN IN 10 F 10 F FB SNS EN EN 4.7 F 4.7 F GND GND R2 V V EN EN Figure 1. Typical Application Schematics Semiconductor Components Industries, LLC, 2017 1 Publication Order Number: January, 2021 Rev. 7 NCP139/DNCP139 CURRENT OUT IN LIMIT ENABLE 150 EN BLOCK *Active DISCHARGE BIAS UVLO V REF VOLTAGE + THERMAL REFERENCE LIMIT FB GND *Active output discharge function is present only in NCP139A option devices. Figure 2. Simplified Schematic Block Diagram Adjustable Version CURRENT IN OUT LIMIT ENABLE 150 EN BLOCK *Active DISCHARGE BIAS UVLO VOLTAGE + REFERENCE THERMAL LIMIT SNS GND *Active output discharge function is present only in NCP139A option devices. Figure 3. Simplified Schematic Block Diagram Fixed Version www.onsemi.com 2