NE5534, SA5534, SE5534, NE5534A, SA5534A, SE5534A Operational Amplifier, Low Noise, Single NE5534, SA5534, SE5534, NE5534A, SA5534A, SE5534A 8 1 5 7 2 3 6 4 Figure 1. Equivalent Schematic MAXIMUM RATINGS Rating Symbol Value Unit Supply Voltage V 22 V S Input Voltage V V Supply V IN Differential Input Voltage (Note 1) V 0.5 V DIFF Operating Temperature Range T C amb NE 0 to +70 SA 40 to +85 SE 55 to +125 Storage Temperature Range T 65 to +150 C stg Junction Temperature T 150 C j Power Dissipation at 25C P mW D N Package 1150 D Package 750 Thermal Resistance, JunctiontoAmbient R C/W JA N Package 130 D Package 158 Output Short-Circuit Duration (Note 2) Indefinite Lead Soldering Temperature (10 sec max) T 230 C sld Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Diodes protect the inputs against overvoltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6 V. Maximum current should be limited to 10 mA. 2. Output may be shorted to ground at V = 15 V, T = 25C. Temperature and/or supply voltages must be limited to ensure dissipation rating S amb is not exceeded.