Ordering number : EN*A2299 STK5F4U3C2D-E Advance Information Thick-Film Hybrid IC STK5F4U3C2D-E Electrical Characteristics at Tc= 25 C, VD1, VD2, VD3, VD4=15V Ratings Test Parameter Symbol Conditions Unit Circuit Min. Typ. Max. Power output section Collector-to-emitter cut-off current ICE VCE=600V Fig.1 - - 1.0 mA Boot-strap diode reverse current IR(BD) VR(BD)=600V - - - 0.5 mA Ic=30A, Tj=25 C - 1.7 2.5 Collector-to-emitter saturation voltage VCE(sat) Fig.2 V Ic=15A, Tj=100 C - 1.4 - IF=30A, Tj=25 C - 1.8 2.7 Diode forward voltage VF Fig.3 V IF=15A, Tj=100 C - 1.5 - j-c(T) IGBT - - 1.8 - C/W Junction to case thermal resistance j-c(D) FWD - - 2.3 - C/W Control (Pre-driver) section Pre-drive power supply consumption VD1,2,3=15V - 0.05 0.4 ID Fig.4 mA current VD4=15V - 1.0 4.0 High level input voltage Vin H HIN1,HIN2,HIN3, - 2.5 - - V Low level input voltage Vin L LIN1,LIN2,LIN3 - - - 0.8 V Protection section Fig.5 0.49 ITRIP threshold voltage VITRIP ITRIP(17) to VSS(19) 0.44 0.54 V Pre-drive low voltage protection UVLO - 10 - 12 V FAULT terminal input electric current IOSD VFAULT=0.1V - - 1.5 - mA From time fault condition FAULT clearance delay time FLTCLR - 1.0 - 3.0 ms clear Thermistor for substrate temperature Resistance between the Rt - 90 - 110 k monitor TH1 and TH2 terminals Switching character tON - 0.6 1.5 s Switching time Io=30A, Inductive load tOFF - 1.2 2.2 s Turn-on switching loss Eon - 710 - J Io=30A, VCC=300V, Turn-off switching loss Eoff - 570 - J VD=15V, L=680 H Fig.6 Total switching loss Etot - 1280 - J Turn-on switching loss Eon - 360 - J Io=15A,VCC=300V, - - Turn-off switching loss Eoff VD=15V,L=680 H, 460 J Tc=100 C Total switching loss Etot - 820 - J Io=15A,VCC=300V, Diode reverse recovery energy Erec - 16 - J VD=15V,L=680 H, - - Diode reverse recovery time Trr 62 ns Tc=100 C Reference Voltage is VSS terminal voltage unless otherwise specified. Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. No.A2299-2/15