DATA SHEET Cables - Classic Form 0490-120815 Cables - Classic Features 50-conductor ribbon cables Cable with header Pre-made in convenient standard lengths connector Header connectors and card edge connectors are both available Description Opto 22 supplies several standard cables that interface with host controllers. There are two series of cables, designated according to the type of connector on each end. The HH series has a header connector on both ends. These cables are used to connect to racks with G4 I/O modules. The OD series has a card edge connector on one end and a header connector on the other end. These cables are used Cable with edge and to connect to racks with G1 I/O modules. header connectors The two cable types use 50-conductor ribbon cable and can be ordered in convenient pre-defined lengths. See Part Numbers table at right. Building Your Own Cables If the standard cables listed in this data sheet do not meet your requirements, the following list can help in choosing the appropriate connectors and cable. Cable (50-Conductor): 3M p/n 3365/50 ALPHA p/n 3580/50 or 3583/50 Part Numbers Part Description Connectors for HH Series (Header-Header): HH1.5 1.5-foot header-to-header cable Circuit Assemblies, Inc. p/n CA50IDS2-C-SPT HH4 4-foot header-to-header cable HH6 6-foot header-to-header cable Connectors for OD Series (Edge-Header): HH8 8-foot header-to-header cable End 1 (Edge Connector)3M p/n 3415-0001 HH10 10-foot header-to-header cable End 1 (Edge Connector)Panduit p/n 055-050-455 OD2 2-foot edge-to-header cable End 2 (Header Connector)Cir- p/n CA50IDS2-C-SPT OD4 4-foot edge-to-header cable cuit Assemblies OD6 6-foot edge-to-header cable Connectors with Strain Relief: OD8 8-foot edge-to-header cable OD10 10-foot edge-to-header cable Use only Panduit Corporation p/n 050A050-455 Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.More About Opto 22 OptoOPCServer, OptoDataLink, options for controller Products redundancy or segmented networking, and support for legacy Opto 22 develops and manufactures reliable, flexible, easy-to- Opto 22 serial mistic I/O units. use hardware and software products for industrial automation, SNAP PAC Brains energy management, remote monitoring, and data While SNAP PAC controllers provide central control and data acquisition applications. distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, OptoEMU Energy Management System digital, and serial functions, including thermocouple The easy-to-use OptoEMU Sensor monitors electrical energy linearization PID loop control and optional high-speed digital use in your facility and delivers detailed, real-time data you counting (up to 20 kHz), quadrature counting, TPO, and pulse can see and analyze. The Sensor can monitor energy data from generation and measurement. pulsing meters, electrical panels or subpanels, and equipment. View energy data online using a software service or SNAP I/O incorporate the data into your control system for complete I/O provides the local connection to sensors and equipment. energy management. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. SNAP PAC System Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor Designed to simplify the typically (SNAP PAC brain or rack-mounted controller). complex process of selecting and applying an automation system, the SNAP PAC System consists of four Quality integrated components: Founded in 1974, Opto 22 has established a SNAP PAC controllers worldwide reputation for high-quality products. All PAC Project Software Suite are made in the U.S.A. at our manufacturing SNAP PAC brains facility in Temecula, California. Because we do SNAP I/O no statistical testing and each part is tested SNAP PAC Controllers twice before leaving our factory, we can Programmable automation controllers (PACs) are guarantee most solid-state relays and optically multifunctional, modular controllers based on open standards. isolated I/O modules for life. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series and the rack-mounted Free Product Support SNAP PAC R-series both handle a wide range of digital, analog, Opto 22s California-based Product Support Group offers free, and serial functions for data collection, remote monitoring, comprehensive technical support for Opto 22 products. Our process control, and discrete and hybrid manufacturing. staff of support engineers represents decades of training and SNAP PACs are based on open Ethernet and Internet Protocol experience. Support is available in English and Spanish by (IP) standards, so you can build or extend a system easily, phone or email, MondayFriday, 7 a.m. to 5 p.m. PST. without the expense and limitations of proprietary networks Additional support is always available on our website: how-to and protocols. videos, OptoKnowledgeBase, self-training guide, PAC Project Software Suite troubleshooting and users guides, and OptoForums. Opto 22s PAC Project Software Suite provides full-featured, In addition, hands-on training is available for free at our cost-effective control programming, HMI (human machine Temecula, California headquarters, and you can register online. interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Purchasing Opto 22 Products Control programming includes both easy-to-learn flowcharts Opto 22 products are sold directly and through a worldwide and optional scripting. Commands are in plain English network of distributors, partners, and system integrators. For variables and I/O point names are fully descriptive. more information, contact Opto 22 headquarters at 800-321- PAC Project Basic offers control and HMI tools and is free for 6786 or 951-695-3000, or visit our website at download on our website, www.opto22.com. PAC Project www.opto22.com. Professional, available for separate purchase, adds www.opto22.com www.opto22.com Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 Form 1335-110907 SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.