DATA SHEET SNAP PAC R-Series Controllers Form 1594-150220 SNAP PAC R-Series Controllers Features Rack-mounted industrial controller with I/O processor included. Two independent 10/100 Mbps Ethernet network interfaces Wired+Wireless models add wireless LAN network interface as well One RS-232 port with handshaking, suitable for modem communication using PPP MicroSD card slot for removable data storage Full-featured control and HMI software included SNAP-PAC-R1 controller with purchase Description The affordable and compact SNAP PAC R-series to mount on SNAP B-series racks so that older I/O units programmable automation controllers provide powerful, real- can be easily upgraded to a newer controller. time control and communication to meet your industrial control, monitoring, and data acquisition needs. Part of the SNAP-PAC-R2, SNAP-PAC-R2-FM, and SNAP-PAC-R2-W Opto 22 SNAP PAC System , the R-series PAC is a rack- also control a mix of SNAP analog, 4-channel and high- mounted, industrially hardened unit that can handle multiple density digital, and serial modules. High-speed digital tasks involving digital and analog control, serial string functions are not included. The -FM model is Factory handling, communication, and enterprise connectivity. Used with the included PAC Project Basic software suite (or Part Numbers PAC Project Professional, purchased separately), the Ethernet- based SNAP PAC R-series controller runs control programs Part Description written in Opto 22s PAC Control software. It can monitor and Analog/digital/serial rack-mounted con- control a wide range of devices and equipment wired to the SNAP-PAC-R1 troller with two Ethernet ports and high- I/O on its own rack and to I/O on distributed racks equipped speed digital functions with SNAP PAC EB-series brains. Alternatively, the R-series Analog/digital/serial rack-mounted con- controller can be used as a slave to a larger, SNAP PAC S-series SNAP-PAC-R1-B troller with two Ethernet ports and high- standalone industrial controller or a SoftPAC software-based speed digital functions, for B-series racks controller for PC-based control. Analog/digital/serial rack-mounted con- troller with two Ethernet ports and high- SNAP PAC R-series controllers are well suited to original SNAP-PAC-R1-FM speed digital functions, Factory Mutual equipment manufacturers (OEMs), system integrators, and approved end-users in process control, discrete manufacturing, or hybrid Wired+Wireless analog/digital/serial rack- industries and applications. mounted controller with two wired Ether- SNAP-PAC-R1-W net ports, one wireless Ethernet interface, Seven models are available: and high-speed digital functions SNAP-PAC-R1, SNAP-PAC-R1-FM, SNAP-PAC-R1-W, and Analog/simple digital/serial rack-mounted SNAP-PAC-R1-B each control a mix of SNAP analog, SNAP-PAC-R2 controller with two Ethernet ports digital (both 4-channel and high-density), and serial Analog/simple digital/serial rack-mounted modules. Full digital functions include high-speed SNAP-PAC-R2-FM controller with two Ethernet ports, Factory counting quadrature counting and pulse, period, and Mutual approved frequency measurement. The -FM model is Factory Wired+Wireless analog/simple digital/ Mutual approved. The -W model adds wireless LAN serial rack-mounted controller with two capability (see Wired+Wireless Communication on SNAP-PAC-R2-W wired Ethernet ports and one wireless page 2 for more information). The -B model is designed Ethernet interface Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 20072015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.SNAP PAC R-Series Controllers Mutual approved.The -W model adds wireless LAN Just like a laptop computer with a wireless connection, all capability (see page 2 for more information). functionality remains the same whether the Wired+Wireless PAC is used wirelessly or as part of a wired network. Supported Built-in functions and comparisons of the SNAP-PAC-R1 and protocols remain the same. And control programs run the SNAP-PAC-R2 are shown in the table on page 10. same on both networks without reprogramming. Ethernet Communication Serial Communication All SNAP PAC R-series controllers communicate over standard SNAP PAC R-series controllers provide an RS-232 serial link to 10/100 Mbps Ethernet networks and can be attached to an support Point-to-Point Protocol (PPP) modem connections existing network. The controllers can also be used in an for creating TCP/IP networks over serial or PSTN (Public independent control network built with standard, off-the- Switched Telephone Network) linesas well as remote serial shelf Ethernet hardware. device communication. SNAP PAC R-series controllers include two 10/100 Mbps The RS-232 serial interface supports either a modem Ethernet interfaces for networking to Ethernet hosts and to connection using PPP or general-purpose communication other I/O units. These independent Ethernet ports have with serial devices, allowing you to send and receive data from separate IP addresses that can be used with PAC Project a serial device connected directly to the controller. For Professional software to set up redundant network links to additional serial interfaces, you can add one or more SNAP safeguard the availability and reliability of an I/O system, or to serial communication modules on the rack. segment a control systems network from the enterprise LAN. NOTE: The R-series controller does not include an RS-485 port and Supported protocols over Ethernet include EtherNet / cannot be used to control Opto 22 serial I/O processors, such IP, Modbus /TCP, SMTP, SNMP, FTP, and OptoMMP. as the SNAP PAC SB-series brains. Use an S-series controller for serial brains. Wired+Wireless Communication SNAP-PAC-R1-W and SNAP-PAC-R2-W controllers I/O Mounting Racks add wireless capability to communications. In addition SNAP PAC R-series controllers must be connected to the to the two wired network interfaces, these models have appropriate rack to avoid damage to the controller. Both a wireless network interface as well, so each PAC has a the SNAP-PAC-R1 and R2 are designed to work with SNAP total of three separate IP addressestwo wired and PAC mounting racks, which are available with 4, 8, 12, or one wireless. Wired+Wireless PACs can be used 16 positions for Opto 22 SNAP I/O modules. Part wirelessly or on a wired network, or both at once. numbers are SNAP-PAC-RCK4, SNAP-PAC-RCK8, For flexibility in designing your wireless network, SNAP-PAC-RCK12, and SNAP-PAC-RCK16. wireless communication includes support for Factory Mutual-approved versions of these 802.11a, b, and g standards. racks, with part numbers ending in -FM, Wired+Wireless PACs can be used with are also available. a variety of wireless switches and other Ethernet PAC for Legacy I/O Racks infrastructure hardware. For the best security, the 802.11i WPA2/AES standard The SNAP-PAC-R1-B is a PAC-R1 for use is supported, while older WPA and WEP with older SNAP B-series racks. This PAC security standards are included for provides an upgrade path from legacy backwards compatibility. brains and rack-mounted controllers such as the B3000, SNAP-B3000-ENET, or SNAP- Because wireless functionality is in the UP1-ADS that use B-series racks. See the PAC itself, no additional parts are required SNAP B-series Racks data sheet (form 0784) within the control system for wireless for more information. use. All SNAP PAC racks and SNAP I/O modules can be used either wired or The SNAP-PAC-R1-B uses the same firmware and wirelessly. You can switch from one network to has the same functionality as the SNAP-PAC-R1, the other without reconfiguring I/O or changing except that 4-channel digital modules can be field wiring. placed only in slots 0-7 due to limitations on the rack. Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2 20072015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET SNAP PAC R-Series Controllers Form 1594-150220