GB6198 FibreFab Fibre Optic & Networking Products 62.5/125 (OM1) Optical Fibre Patchcords Optical Fibre patchcords are a defining factor in ensuring your network performs to the highest level. A patchcord can be split into three key components the connector the cable the manufacturing process. These three areas all contribute to the performance of a patchcord, but it is the manufacturing process that defines the performance of the assembly. Whilst the cable and connectors used in FibreFab optical fibre patchcords are the best available, it is our expertise in production that sets our products apart. FibreFab has 15 years experience in manufacturing fibre optic cable assemblies from using Biconic and SMA through to ST, SC to todays Small Form Factor (SFF) connectors like the LC, MU or MT-RJ. If you have a fibre network, no matter what the technology, FibreFab can offer you a solution. Tyco AMP approved UK Multimode & Singlemode manufacturing facility applications ST/SC/FC/LC/E2000/ MU Connector types Fast turn around of non-standard requirements Ultra polish & Angle polish options available all terminations Full tracability & test certification are manufactured to exceed supplied with each assembly performance parameters set by industry standards 900m tight buffered fibre optic cable FibreFab Fibre Optic & Networking Products Specifications Optical fibre and cable performance Patchcord Specification Attenuation (dB/km) Mechanical (850/1300) 2.8/0.8 Length: 1m to 10m 10mm Other lengths available to order Bandwidth (MHz.Km) (850/1300) 200/500 Split Length (Duplex): 150mm 5mm Sheath colour Product Packaging Yellow Each patch cord is packaged individually and individually identified for traceability, Strength Members test certification is supplied for each Aramid strength members assembly. Fire Performance LSZH for Internal/External Applications Flame Resistance IEC 60332-1 Connector Specification Optical Performance (Multimode) Insertion loss: Max. 0.3 dB Typical 0.2 dB Optical Performance (MT-RJ) Insertion loss: Max. 0.5 dB Operating Temperature -40C to +85C Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 874-14. For full information on the Optronics connectors used on the FibreFab patch cords, please contact the address below for a connector data sheet. Ordering Information Fibre Cable Connectors Connectors Cable Length (m) 1 2 1 3 Size Colour End 1 End 2 Configuration 62 FC FC/APC SC 1m SC/APC S = Simplex OR = Orange 2m ST GY = Grey D = Duplex 3m LC MT-RJ 5m MU 1 10m Other Connectors Available on Request E2000 2 Singlemode cable only available in Yellow 3 MT-RJ is only available in MiniZip FibreFab Limited Davy Avenue Tel: +44 (0) 870 127 3330 Knowlhill Fax: +44 (0) 870 127 3331 Milton Keynes Email: sales fibrefab.com MK5 8ND Internet: www.fibrefab.com FibreFab Ltd is registered in England no. 2734823. Copyright FibreFab 2005. All Rights Reserved.