PUSHBUTTONS LP7-D ILLUMINATED ILLUMINATED VANDAL RESISTANT PUSHBUTTONS SEALED DOME ILLUMINATED PUSHBUTONS PUSHBUTTONS MOMENTARY ACTION, ATTRACTIVE & HIGHLY RUGGEDIZED FOR WET & DUSTY ENVIRONMENTS The LP7-D series pushbutton switches feature a contoured dome style pushbutton. While sharing similar size and characteristics to the P9 series, the LP7-D offers added durability with its anodized aluminum alloy case. Flush Dome Button versions include flush dome and raised dome. The switch series features short behind panel depth. They also offer Also available with excellent mechanical and electrical performance while operating Raised Dome under severe conditions found in demanding applications. The LP7-D Dome series offers one million mechanical operations and an electrical life of 25,000 operations. The LP7-D Dome series is a quality precision switch designed Standard Characteristics/Ratings: for use in panels, control grips, computers, instruments, heavy ELECTRICAL RATINGS: Sea Level 28VDC or 115VAC equipment and other demanding applications where attractive, Load N.O./N.C. S.P.D.T highly ruggedized pushbutton switches are required. Resistive 5A 4A The LP7-D series is manufactured to the highest standards Inductive 3A 2A and built to withstand harsh environments, offering anodized Motor 3A N/A aluminum alloy cases with seal options of dusttight to IP64 DWV 1050Vrms through switch contacts only or watertight to IP68S. The LP7-D series offers long life LED Low Level 10mA 30mV lighting in a variety of colors and can accommodate 2 & 12VDC Electrical Life: 25,000 cycles power. LIGHTING: Light Source Voltage (DC) Actual Voltage Nominal (DC) Voltage Max (DC) Features: 2 2 2.6 Attractive dome style button 12 13.5 14.5 Mechanical Life: 1,000,000 cycles Watertight to IP68S dusttight to IP64 Seal: IP64 or IP68S LED illuminated with the ability to accommodate 2 & Operating Temp Range: -40C to +85C 12VDC power Operating Force: 1.7 lbs. 0.5 lbs. Flush and raised buttons in glossy or matte finish Total Travel: 0.080 inches max available in a variety of colors Overtravel: 0.010 inches min 15/32 threaded case style MATERIALS: RoHS/WEEE/Reach compliant Case: Anodized aluminum alloy Button: Thermoplastic Terminals: Silver with gold plate Mounting Hardware: Hex nut, lockwasher and panel seal gasket LP7-D PART NUMBER CODE LP7-D X X X X X X X Button Style Terminal Style/Seal Circuit Form Contact Rating Light Source* Case Color Button Color 1. Flush 1. Standard Solder Terminal 1. N.O. 1. Standard Current A. 2V Red LED 1. Clear 1. Red Dusttight 2. Raised 2. N.C. 2. Low Level Current B. 2V Green LED 2. Black 2. Black 2. Standard Solder Terminal 3. Flush Matte 3. 2 Circuit C. 2V Amber LED 3. Orange Watertight 4. Raised Matte D. 2V Blue LED 4. Yellow 3. P.C. Pin Terminal E. 2V White LED 5. Green Dusttight F. 12V Red LED 6. Blue 4. P.C. Pin Terminal G. 12V Green LED 7. Violet Watertight H. 12V Amber LED 8. Gray J. 12V Blue LED 9. White K. 12V White LED L. 2V Deep Green LED M. 12V Deep Green LED * For additional LED lighting options, contact factory. Specifications Subject To Change Without Notice www.ottoexcellence.com 100LP7-D ILLUMINATED SEALED DOME ILLUMINATED PUSHBUTTONS PUSHBUTTONS MOMENTARY ACTION, ATTRACTIVE & HIGHLY RUGGEDIZED FOR WET & DUSTY ENVIRONMENTS 101 OTTO Full Line Catalog Specifications Subject To Change Without Notice