P9-613121

PUSHBUTTONS P9 DOME SEALED DOME PUSHBUTTON SWITCHES PUSHBUTTONS MOMENTARY ACTION, ATTRACTIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS The P9 Dome series pushbutton switches feature a contoured dome style pushbutton and share similar size and characteristics to the P7 series. Major differences are plastic housing construction Raised Dome with and the availability of a shorting bar contact arrangement. There Threaded Case are two button versions: low button profile and high button profile. The P9 comes with a threaded case for hex nut mounting or with a snap-in case. The switch series features short behind panel depth. They also offer excellent mechanical and electrical performance while operating under severe conditions found in demanding applications. The P9 Dome series is offered in dusttight and moistureproof Flush Dome with sealed construction. One million mechanical operations and an Threaded Case electrical life of 25,000 operations at full rated load of 5 amps resistive or 3 amps inductive. Watertight sealing is available simply by adding a W suffix to the part number to specify IP68S rating. The P9 Dome series is available in standard and low-force double break snap-action and non-snap shorting bar models. All are momentary action. Special contact variations are Snap-In Case with available. High contact pressure and unique contact design 0.110 Quick Connect Terminals provide low contact resistance for low level switching capability as well as full rated service. Solder, PC Pin, and 0.110 Quick Connect termination options are available. CUS Positive tactile feedback signaling the operator when the switch Standard Characteristics/Ratings: is operated is available in snap-action models but not shorting bar models. ELECTRICAL RATINGS: Sea Level @ 28VDC or 115VAC, 60/400Hz The P9 Dome series is a quality precision switch designed for Load N.O./N.C. 2 Circuit use in panels, control grips, computers, instruments, heavy Resistive 5A 4A Inductive 3A 2A equipment and other demanding applications where attractive, rugged pushbutton switches are required. DWV 1050Vrms Electrical Life: 25,000 cycles 5A @ 28VDC resistive snap-action Mechanical Life: 1,000,000 cycles Features: Seal: IP64 or IP68S Attractive dome style button Operating Temp Range: -40C to +85C Operating Force: Standard: 1.7 lbs. +/- 0.5 lb. 2 button heights Low Force: 12 oz +/- 4 oz Double break or shorting bar, momentary action Shorting Bar: 18 oz +/- 6 oz Total Travel: 0.080 inches max All plastic housing & button construction Overtravel: 0.010 inches min Threaded body or snap-in panel mounting MATERIALS: Withstands extreme shock & vibration Case: Thermoplastic Positive tactile feedback contact transfer on Button: Thermoplastic snap-action models Terminals: Brass with gold over silver Solder, PC Pin & 0.110 Quick Connect Terminal Hardware: None provided terminal styles Mounting Hardware: Hex nut, lockwasher Panel gasket when applicable Moistureproof & dusttight to IP64 or watertight to IP68S UL recognized & CSA certified RoHS/WEEE/Reach compliant Specifications Subject To Change Without Notice www.ottoexcellence.com 139P9 DOME PUSHBUTTONS SEALED DOME PUSHBUTTONS CHOICE OF SNAP-ACTION & SHORTING BAR ACTION .179 (.062) .179 .179 (.062) SR.35 SR.36 SR.36 .084 .050 .055 SR.35 SR.35 .048 SR.35 .13 TYP. .31 15/32-32 UNRS-2A 15/32-32 UNRS-2A TO WITHIN .062 .27 .47 .09 TYP. .39.46 .28.46 TO WITHIN .062 OF SHOULDER OF SHOULDER Snap-In Case Raised Dome Button Style Flush Dome Button Style (PC Terminals Shown) NO NC NC NO Component Side P.C. Mounting Pattern 0.110 Quick Connect Detail (As viewed from switch bottom) Recommended Panel Openings *Panel Thickness Recommended 0 DIM. Across D-Flat 0.024* 0.505 0.460 0.031 0.505 0.460 0.118* 0.505 0.460 0.125 0.505 0.460 * Must use panel gasket 401669 supplied with the switch. Snap-in case allows front panel mounting into 0.024 or 0.118 thick panels using panel gasket 401669 or into 0.031 and 0.125 thick panels 0.110 Quick Connect terminals allow reliable, solderless wire connections Solder Terminals PC Pin Flush Neoprene Black Boot P/N 402339 (Terminals not (Orientated to case Raised Neoprene Black Boot P/N 402246 orientated to flat) flats as shown) Threaded Case Snap-In Case Flush Silicone Translucent Boot P/N 402599-1 Raised Silicone Translucent Boot P/N 402611-1 P9 PART NUMBER CODE P9 X X X X X X * ORDERING INFORMATION: Select the OTTO P9 series features that Button & Case Style*** Terminal Style Circuit Switch Action Case/ Button Form Bezel Color Color match your specific application. Standard 1. Flush Dome & Threaded Case, Std. Finish 1. Solder 1. N.O. 1. Standard Snap-Action 1. Red 1. Red and special features are shown at right. 2. Raised Dome & Threaded Case, Std. Finish 2. PC Pin 2. N.C. 2. Low Force Snap-Action 2. Black 2. Black Specify your choice by building the OTTO 3. Flush Dome & Snap-In Case, Std. Finish 3. 0.110 3. 2 Circuit 3. Orange** 3. Orange 4. Raised Dome & Snap-In Case, Std. Finish Quick Connect 4. Yellow** 4. Yellow Part Number code. 5. Flush Dome & Threaded Case, Matte Finish 5. Green** 5. Green 6. Raised Dome & Threaded Case, Matte Finish 6. Blue** 6. Blue Example: P9-211121 specifies raised 7. Flush Dome & Snap-In Case, Matte Finish 7. Violet** 7. Violet dome style button, threaded case, solder 8. Raised Dome & Snap-In Case, Matte Finish 8. Gray** 8. Gray terminals, N.O. circuit form, standard snap- 9. White 9. White Not available in Shorting Bar version. action, black case/bezel, red button. * Add W suffix for watertight to IP68S (will include panel gasket) ** Contact factory for minimum requirement. *** Contact factory for std./matte button/case combination options. 140 OTTO Full Line Catalog Specifications Subject To Change Without Notice