Datasheet : A wide variety of tip cartridges are available for use with the TD-100 and the MT-100 Handpieces. Please refer to the table below for available tip cartridge styles. PACE P/N Description 1124-0001-P1 1/32 Conical Sharp Extended 1124-0002-P1 1/64 Conical Sharp 1124-0003-P1 1/64 Conical Sharp Bent 30 Degrees 1124-0004-P1 1/64 Conical Sharp Extended 1124-0005-P1 1/32 Conical 1124-0006-P1 3/128 Conical 1124-0007-P1 1/16 90 Degree Chisel 1124-0008-P1 3/64 30 Degree Chisel 1124-0009-P1 3/64 30 Degree Bevel 1124-0010-P1 13/64 Chisel 1124-0011-P1 1/64 60 Degree Bevel 1124-0012-P1 1/32 30 Degree Chisel 1124-0013-P1 3/32 30 Degree Chisel 1124-0014-P1 5/64 60 Degree Bevel 1/64 Conical, Sharp, Bent 30 Degrees, 1124-0015-P1 Extended 1124-0016-P1 3/64 Chisel Bent 30 Degrees 1124-0017-P1 1/16 60 Degree Chisel 1124-0018-P1 1/32 Conical Sharp Extended 2003 PACE Inc., Annapolis Junction, Maryland All Rights Reserved DDa1124-0019-P1 1/16 30 Degree Chisel 1124-0020-P1 1/8 90 Degree Chisel 1124-0021-P1 3/128 Conical Sharp Bent 30 Degrees 1124-0022-P1 1/16 Conical Sharp 1124-0023-P1 1/8 90 Degree Chisel Extended 1124-0024-P1 1/16 30 Degree Bevel 1124-0025-P1 1/16 Conical Sharp Extended 1124-0026-P1 1/16 Chisel Bent 30 Degrees 1124-0027-P1 3/128 Conical Sharp, Extended 1124-0028-P1 3/64 Chisel, Bent 30 Degrees, Extended 1124-0029-P1 1/32 30 Degree Bevel 1124-0030-P1 1/32 Conical Sharp 1124-0031-P1 Heat Staking 1124-0032-P1 MiniWave 1124-0033-P1 Angled MiniWave, 3.3 mm 1124-0034-P1 Single Sided Chisel 1124-0035-P1 Angled MiniWave, 2.4mm 1124-0036-P1 1/128 Conical 1124-0037-P1 1/4 Flat Blade 1124-0038-P1 Single Sided Chisel, Fine Pitch 2003 PACE Inc., Annapolis Junction, Maryland All Rights Reserved