16SVPK680M Panasonic

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPK series Features High voltage (50 V max.) 125 1000 h RoHS compliance, Halogen free Specifications Size code B6 C6 E7 E12 F12 Category temp. range 55 to +125 Rated voltage range 16 V to 50 V Nominal cap.range 10 F to 100 F 22 F to 220 F 33 F to 330 F 68 F to 680 F 120 F to 1200 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +125 1000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking () Lot No. Series code* L R Unit R. capacitance Size +0.1 *1 R. voltage (F) D0.5 L W0.2 H0.2 C0.2 R P -0.4 code (V) 0.6 to 0.8 B6 5.0 5.9 5.3 5.3 6.0 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 0.6 to 0.8 E7 8.0 6.9 8.3 8.3 9.0 3.2 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 0.8 to 1.1 * Depends on the case size. F12 10.0 12.6 10.3 10.3 11.0 4.6 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-18 D H P CSVPK series Characteristics list Case size Specifications Standard (Reel size : 380) (mm) Rated Rated capacitance Size Allowable Min. voltage Ripple *4 (20 %) code *2 ripple LC Packaging ESR *3 (V) *1 D L tan Part number current *1 (F) Q ty (m max.) current (A (mA rms) (pcs) (mA rms) 100 5.0 5.9 B6 940 3000 27 0.12 320 16SVPK100M 1500 220 6.3 5.9 C6 1040 3300 22 0.12 704 16SVPK220M 1000 16 330 8.0 6.9 E7 1040 3300 22 0.12 1056 16SVPK330M 1000 680 8.0 11.9 E12 1560 4950 14 0.12 2176 16SVPK680M 400 1200 10.0 12.6 F12 1700 5400 12 0.12 3840 16SVPK1200M 400 68 5.0 5.9 B6 880 2800 30 0.12 272 20SVPK68M 1500 150 6.3 5.9 C6 1010 3200 25 0.12 600 20SVPK150M 1000 20 220 8.0 6.9 E7 1010 3200 25 0.12 880 20SVPK220M 1000 470 8.0 11.9 E12 1560 4950 14 0.12 1880 20SVPK470M 400 680 10.0 12.6 F12 1700 5400 12 0.12 2720 20SVPK680M 400 33 5.0 5.9 B6 820 2600 35 0.12 165 25SVPK33M 1500 82 6.3 5.9 C6 960 3060 25 0.12 410 25SVPK82M 1000 25 120 8.0 6.9 E7 1010 3200 24 0.12 600 25SVPK120M 1000 270 8.0 11.9 E12 1470 4650 16 0.12 1350 25SVPK270M 400 470 10.0 12.6 F12 1590 5000 14 0.12 2350 25SVPK470M 400 22 5.0 5.9 B6 820 2600 35 0.12 154 35SVPK22M 1500 47 6.3 5.9 C6 930 2950 27 0.12 329 35SVPK47M 1000 35 82 8.0 6.9 E7 960 3060 25 0.12 574 35SVPK82M 1000 180 8.0 11.9 E12 1260 4000 20 0.12 1260 35SVPK180M 400 330 10.0 12.6 F12 1390 4400 18 0.12 2310 35SVPK330M 400 10 5.0 5.9 B6 550 1750 80 0.12 100 50SVPK10M 1500 22 6.3 5.9 C6 820 2600 35 0.12 220 50SVPK22M 1000 50 33 8.0 6.9 E7 850 2700 35 0.12 330 50SVPK33M 1000 68 8.0 11.9 E12 1200 3800 25 0.12 680 50SVPK68M 400 120 10.0 12.6 F12 1350 4300 20 0.12 1200 50SVPK120M 400 *1: Ripple current (100 kHz / +105 < Tx +125 ) /Allowable ripple current (100 kHz / Tx +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-18