16SVPT1000M Panasonic

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPT series Features Low ESR (10 m max.) Large capacitance (2700 F max.) 105 20000 h RoHS compliance, Halogen free Specifications Size code C65 E7 E12 F12 Category temp. range 55 to +105 Rated voltage range 2.5 V to 16 V 2.5 V to 50 V Nominal cap. range 100 F to 680 F 18 F to 680 F 39 F to 1500 F 68 F to 2700 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 20000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking () Lot No. Series code* L R R. capacitance R. voltage (F) (V) Unit Size +0.1 *1 D0.5 L W0.2 H0.2 C0.2 R P -0.4 code 0.6 to 0.8 C65 6.3 6.4 6.6 6.6 7.3 2.1 0.6 to 0.8 E7 8.0 6.9 8.3 8.3 9.0 3.2 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 * Depends on the case size. F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Oct-20 D H P CSVPT series Characteristics list Case size Specifications StandardReel size : 380 (mm) Rated Rated capacitance Size Min. voltage Ripple *4 *2 (20 %) code LC Packaging ESR *1 *3 (V) D L Part number current tan Q ty (F) (m max.) (A (mA rms) (pcs) 560 6.3 6.4 3500 16 0.12 300 2R5SVPT560M 1000 C65 6.3 6.4 3500 16 0.12 850 2R5SVPT680MX 1000 680 2.5 8.0 6.9 E7 3370 20 0.12 500 2R5SVPT680M 1000 1500 8.0 11.9 E12 5150 10 0.12 750 2R5SVPT1500M 400 2700 10.0 12.6 F12 5070 12 0.12 1350 2R5SVPT2700M 400 560 8.0 6.9 E7 3220 22 0.12 500 4SVPT560M 1000 4.0 1500 8.0 11.9 E12 4700 12 0.12 1200 4SVPT1500M 400 330 6.3 6.4 C65 3390 15 0.12 415 6SVPT330M 1000 6.3 390 8.0 6.9 E7 3220 22 0.12 491 6SVPT390M 1000 820 8.0 11.9 E12 4700 12 0.12 1033 6SVPT820M 400 100 6.3 6.4 C65 2490 24 0.12 300 16SVPT100M 1000 270 8.0 6.9 E7 3300 22 0.12 864 16SVPT270M 1000 16 560 8.0 11.9 E12 4950 14 0.12 1792 16SVPT560M 400 1000 10.0 12.6 F12 5400 12 0.12 3200 16SVPT1000M 400 180 8.0 6.9 E7 3200 25 0.12 720 20SVPT180M 1000 20 390 8.0 11.9 E12 4950 14 0.12 1560 20SVPT390M 400 560 10.0 12.6 F12 5400 12 0.12 2240 20SVPT560M 400 100 8.0 6.9 E7 3200 24 0.12 500 25SVPT100M 1000 25 180 8.0 11.9 E12 4650 16 0.12 900 25SVPT180M 400 330 10.0 12.6 F12 5000 14 0.12 1650 25SVPT330M 400 39 8.0 6.9 E7 2800 30 0.12 273 35SVPT39M 1000 35 82 8.0 11.9 E12 4000 20 0.12 574 35SVPT82M 400 120 10.0 12.6 F12 4400 18 0.12 840 35SVPT120M 400 18 8.0 6.9 E7 2700 35 0.12 180 50SVPT18M 1000 50 39 8.0 11.9 E12 3800 25 0.12 390 50SVPT39M 400 68 10.0 12.6 F12 4300 20 0.12 680 50SVPT68M 400 *1: Ripple current (100 kHz / +105 ) The surface temperature of aluminum case top must not exceed 105 C. A rise in temperature due to self-heating by ripple current should be factored in. *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Oct-20