Conductive Polymer Aluminum Solid Capacitors Radial Lead Type SEK series Features High voltage (50 V max.) 125 1000 h RoHS compliance, Halogen free Specifications Size code C6 E7 E12 F13 Category temp. range 55 to +125 Rated voltage range 25 V to 50 V Nominal cap.range 22 F to 82 F 33 F to 120 F 68 F to 270 F 120 F to 470 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +125 1000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Polarity marking () d Lot No. Series code* 15 min. 4 min. L max. 19 min. R. capacitance (F) R. voltage Unit (V) Size code D0.5 L max. F0.5 d0.05 C6 6.3 6.0 2.5 0.5 E7 8.0 7.0 3.5 0.5 E12 8.0 12.0 3.5 0.6 * Depends on the case size. F13 10.0 13.0 5.0 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Oct-17 D FSEK series Characteristics list Case size Specifications (mm) Part number Rated Rated capacitance Size Allowable voltage Ripple *2 *4 code ripple (20 %) Click here for part number ESR *3 LC *1 (V) D L tan current *1 list of lead terminal cutting (F) (m max.) (A) current (mA rms) and lead terminal taping (mA rms) 82 6.3 6.0 C6 960 3060 25 0.12 410 25SEK82M 120 8.0 7.0 E7 1010 3200 24 0.12 600 25SEK120M 25 270 8.0 12.0 E12 1470 4650 16 0.12 1350 25SEK270M 470 10.0 13.0 F13 1590 5000 14 0.12 2350 25SEK470M 47 6.3 6.0 C6 930 2950 27 0.12 329 35SEK47M 82 8.0 7.0 E7 960 3060 25 0.12 574 35SEK82M 35 180 8.0 12.0 E12 1260 4000 20 0.12 1260 35SEK180M 330 10.0 13.0 F13 1390 4400 18 0.12 2310 35SEK330M 22 6.3 6.0 C6 820 2600 35 0.12 220 50SEK22M 33 8.0 7.0 E7 850 2700 35 0.12 330 50SEK33M 50 68 8.0 12.0 E12 1200 3800 25 0.12 680 50SEK68M 120 10.0 13.0 F13 1350 4300 20 0.12 1200 50SEK120M *1: Ripple current (100 kHz / +105 < Tx +125 ) / Allowable ripple current (100 kHz / Tx +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Flow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Oct-17