35SVPD22M Panasonic

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPD series Features 125 2000 h Guaranteed at 85 85 % RoHS compliance, Halogen free Specifications Size code C6 E7 E12 F8 F12 Category temp. range 55 to +125 10 V to 25 V 16 V to 35 V Rated voltage range 25 V to 35 V Nominal cap.range 10 F to 56 F 8.2 F to 82 F 22 F to 47 F 18 F to 39 F 47 F to 82 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +125 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit +85 , 80 % to 90 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. Polarity marking () W Lot No. Series code* L R R. capacitance Unit (F) R. voltage Size +0.1 *1 D0.5 L W0.2 H0.2 C0.2 R P (V) -0.4 code 0.6 to 0.8 C6 6.3 5.9 6.6 6.6 7.3 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 0.8 to 1.1 E12 8.0 11.9 8.3 8.3 9.0 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 * Depends on the case size. 0.8 to 1.1 F12 10.0 12.6 10.3 10.3 11.0 4.6 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15 D H P CSVPD series Characteristics list Case size Specifications Standard (Reel size : 380) (mm) Rated Rated capacitance Size Allowable Min. voltage Ripple *4 *2 (20 %) code ripple LC Packaging ESR *3 *1 (V) D L tan Part number current *1 (F) Q ty (m max.) current (A (mA rms) (pcs) (mA rms) 10 56 6.3 5.9 C6 538 1700 45 0.12 112 10SVPD56M 1000 16 82 8.0 6.9 E7 670 2120 40 0.12 262 16SVPD82M 1000 10 6.3 5.9 C6 474 1500 65 0.10 50 25SVPD10M 1000 22 8.0 6.9 E7 580 1835 48 0.10 110 25SVPD22M 1000 25 39 10.0 7.9 F8 664 2100 45 0.10 195 25SVPD39M 500 47 8.0 11.9 E12 943 2980 30 0.12 235 25SVPD47M 400 82 10.0 12.6 F12 1202 3800 28 0.12 410 25SVPD82M 400 8.2 8.0 6.9 E7 400 1300 70 0.10 57 35SVPD8R2M 1000 18 10.0 7.9 F8 550 1800 60 0.10 126 35SVPD18M 500 35 22 8.0 11.9 E12 700 2300 50 0.12 154 35SVPD22M 400 47 10.0 12.6 F12 1150 3650 30 0.12 329 35SVPD47M 400 *1: Ripple current (100 kHz / +105 < Tx +125 ), Allowable ripple current (100 kHz / Tx +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15