35SVPF22M Panasonic

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPF series Features High voltage (50 V max.) Large capacitance (1000 F max.) 105 5000 h RoHS compliance, Halogen free Specifications Size code B6 C6 E7 E10 E12 F10 F12 Category temp. range 55 to +105 Rated voltage range (V) 16 to 25 16 to 50 16 16 to 50 16 16 to 50 Nominal cap.range (F 27 to 82 10 to 180 18 to 270 560 39 to 560 1000 68 to 1000 Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 5000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking () Lot No. Series code* L R Unit Size +0.1 *2 D0.5 L W0.2 H0.2 C0.2 R P -0.4 R. capacitance code (F) R. voltage 0.6 to 0.8 B6 5.0 5.9 5.3 5.3 6.0 1.4 (V) C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 0.6 to 0.8 E7 8.0 6.9 8.3 8.3 9.0 3.2 *1 E10 8.0 8.3 8.3 9.0 0.8 to 1.1 3.2 10.0 0.8 to 1.1 E12 8.0 11.9 8.3 8.3 9.0 3.2 *1 F10 10.0 10.3 10.3 11.0 0.8 to 1.1 4.6 10.0 * Depends on the case size. 0.8 to 1.1 F12 10.0 12.6 10.3 10.3 11.0 4.6 *1 : 0.5, *2 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jun-19 D H P CSVPF series Characteristics list Case size Specifications StandardReel size : 380 (mm) Rated Rated capacitance Size Min. voltage Ripple *4 *2 (20 %) code LC Packaging ESR *1 *3 (V) D L Part number current tan (F) Q ty (m max.) (A (mA rms) (pcs) 82 5.0 5.9 B6 3000 27 0.12 262 16SVPF82M 1500 180 6.3 5.9 C6 3300 22 0.12 576 16SVPF180M 1000 270 8.0 6.9 E7 3300 22 0.12 864 16SVPF270M 1000 16 8.0 10.0 E10 3900 18 0.12 1792 16SVPF560MX 500 560 8.0 11.9 E12 4950 14 0.12 1792 16SVPF560M 400 10.0 10.0 F10 4300 16 0.12 3200 16SVPF1000MX 500 1000 10.0 12.6 F12 5400 12 0.12 3200 16SVPF1000M 400 56 5.0 5.9 B6 2800 30 0.12 224 20SVPF56MX 1500 120 6.3 5.9 C6 3200 25 0.12 480 20SVPF120M 1000 20 180 8.0 6.9 E7 3200 25 0.12 720 20SVPF180M 1000 390 8.0 11.9 E12 4950 14 0.12 1560 20SVPF390M 400 560 10.0 12.6 F12 5400 12 0.12 2240 20SVPF560M 400 27 5.0 5.9 B6 2450 40 0.12 135 25SVPF27MX 1500 47 6.3 5.9 2800 30 0.12 235 25SVPF47M 1000 C6 56 6.3 5.9 2800 30 0.12 280 25SVPF56M 1000 25 82 8.0 6.9 3000 28 0.12 410 25SVPF82M 1000 E7 100 8.0 6.9 3200 24 0.12 500 25SVPF100M 1000 180 8.0 11.9 E12 4650 16 0.12 900 25SVPF180M 400 330 10.0 12.6 F12 5000 14 0.12 1650 25SVPF330M 400 22 6.3 5.9 C6 2600 35 0.12 154 35SVPF22M 1000 39 8.0 6.9 E7 2800 30 0.12 273 35SVPF39M 1000 35 82 8.0 11.9 E12 4000 20 0.12 574 35SVPF82M 400 120 10.0 12.6 F12 4400 18 0.12 840 35SVPF120M 400 10 6.3 5.9 C6 2500 40 0.12 100 50SVPF10M 1000 18 8.0 6.9 E7 2700 35 0.12 180 50SVPF18M 1000 50 39 8.0 11.9 E12 3800 25 0.12 390 50SVPF39M 400 68 10.0 12.6 F12 4300 20 0.12 680 50SVPF68M 400 *1: Ripple current (100 kHz / +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jun-19