AM1701F

High Operating Precision AM1 (NZ) Basic Switches with High Capacity and Long Life SWITCHES FEATURES TYPICAL APPLICATIONS 49.2 10 A Current switching capacity Transfer machine 17.5 High precision and long life Packing machine Versatile variety of actuators Textile equipment 24.1 Screw terminal types can be used Cutting machine with M4 crimp terminals Foot operated switch, etc. (Unit: mm) RoHS compliant ORDERING INFORMATION AM1 F Upper body cover shape & terminal Basic specifications Actuators F: Cadmium free 1: Flat, solder terminal 0: Standard type 0: Pin plunger 3: Flat, screw terminal 1: Oil tight type 1: Hinge lever (Flexible leaf lever) 5: Grooved, solder terminal 3: Reversed action type 7: Grooved, screw terminal 4: One way type 3: Hinge roller lever (Flexible roller leaf lever) 4: Hinge short roller lever Upper body cover shape Flat Grooved 5: Overtravel plunger 6: Compact overtravel plunger 7: Panel mount plunger 811: Panel mount roller plunger 812: Panel mount cross roller plunger Note: Not every combination is available. Please refer to the following table, PRODUCT TYPES. Standard part number indicates UL/C-UL (CSA standard) mark. AECTB8E 201408-T 1AM1 (NZ) Basic Switches PRODUCT TYPES Standard type Terminal style Actuator Solder terminal Screw terminal Pin plunger AM1100F AM1300F Over travel plunger AM1105F AM1305F Compact over travel plunger AM1106F AM1306F Panel mount plunger AM1107F AM1307F Panel mount roller plunger AM110811F AM130811F Panel mount cross roller plunger AM110812F AM130812F Flexible leaf lever AM1101F AM1301F Flexible roller leaf lever AM1103F AM1303F Hinge lever AM1501F AM1701F Hinge short roller lever AM1504F AM1704F Hinge roller lever AM1503F AM1703F One way type hinge short roller lever AM1544F AM1744F One way type hinge roller lever AM1543F AM1743F Reversed action type hinge lever AM1531F AM1731F Reversed action type hinge short roller lever AM1534F AM1734F Reversed action type hinge roller lever AM1533F AM1733F Standard packing for inner carton: 20cps. Note: Standard part number indicates UL/C-UL (CSA standard) mark. Oil tight types Terminal style Actuator Solder terminal Screw terminal Hinge lever AM1511F AM1711F Hinge short roller lever AM1514F AM1714F Hinge roller lever AM1513F AM1713F Standard packing for inner carton: 20cps. Note: Standard part number indicates UL/C-UL (CSA standard) mark. SPECIFICATIONS Contact Rating Motor or lamp load Resistive load Inductive load Type Voltage (cos = 1) (cos = 0.4) NC NO 125 V AC 10 A 6 A 3 A 1.5 A 250 V AC 10 A 6 A 2 A 1 A Standard type 480 V AC 1 A 0.5 A 125 V DC 0.5 A 0.05 A 250 V DC 0.25 A 0.03 A 125 V AC 10 A 6 A 3 A 1.5 A Oil tight type 250 V AC 10 A 6 A 2 A 1.0 A 125 V DC 0.5 A 0.05 A Characteristics Item Specications 7 Min. 2 10 (60 cpm) (OT: specied value) Pin plunger types 6 (Oil tight: Min. 1.5 10 ) Mechanical 6 Min. 5 10 (60 cpm) (OT: specied value) Expected life Other actuator types 6 (Oil tight: Min. 1.5 10 ) 5 Min. 5 10 (20 cpm) (at rated load) Electrical (OT: Max.) 5 (Oil tight: Min. 1.5 10 ) Insulation resistance Min. 100 M (at 500 V DC) Between non-continuous terminals 1,000 Vrms for 1 min. Dielectric strength Between each terminal and other exposed metal parts 2,000 Vrms for 1 min. Between each terminal and ground 2,000 Vrms for 1 min. Contact resistance (initial) Max. 50 m (by voltage drop, 1 A, 6 to 8 V DC) Vibration resistance (Pin plunger type) Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.) 2 Pin plunger types Min. 300 m/s (contact opening: max. 1 msec.) Shock resistance 2 Other actuator types Min. 50 m/s (contact opening: max. 1 msec.) Allowable operating speed (at no load) 0.1 to 1,000 mm/sec. (at pin plunger position) Max. operating cycle rate (at no load) 240 cpm Ambient temperature 25C to +80C (no freezing and condensing) Unit weight Approx. 20 to 55 g Contact specications Contact material Ag alloy Protection grade IP40 AECTB8E 201408-T 2