GU 2 Form A (AQW21 P ) Compact DIP8-pin type of GU 2 Form A 60V to 600V load voltage (AQW21P ) FEATURES 6.4 1. Compact 8-pin DIP size 5. Low-level off state leakage current 9.78 .252 .385 The device comes in a compact (W) 6.4 of max. 1 A 3.9 .154 (L) 9.78 (H) 3.9 mm (W) .252(L) 6. Wide variation of load voltage 60V 6.4 .385(H) .154 inch, 8-pin DIP size to 600V 9.78 .252 .385 3.6 (through hole terminal type)142 2. Applicable for 2 Form A use as well as two independent 1 Form A use TYPICAL APPLICATIONS 3. Controls low-level analog signals mm inch PhotoMOS relays feature extremely low High-speed inspection machines closed-circuit offset voltage to enable Telephones equipment 1 8 control of low-level analog signals without Computer 2 7 distortion. 3 6 4. High sensitivity and high speed response 4 5 Can control max. 0.6 A load current with 5 mA input current. Fast operation speed of typ. 0.65 ms (AQW212). TYPES Part No. Output rating* Packing quantity Through hole Surface-mount terminal terminal Package Tape and reel packing style Load Load Tube packing style Tube Tape and reel Picked from the Picked from the voltage current 1/2/3/4-pin side 5/6/7/8-pin side 60V 500 mA AQW212 AQW212A AQW212AX AQW212AZ 100 V 300 mA AQW215 AQW215A AQW215AX AQW215AZ 1 tube contains: 200 V 160 mA AQW217 AQW217A AQW217AX AQW217AZ AC/DC 40 pcs. DIP8-pin 1,000 pcs. dual use 1 batch contains: 350 V 120 mA AQW210 AQW210A AQW210AX AQW210AZ 400 pcs. 400 V 100 mA AQW214 AQW214A AQW214AX AQW214AZ 600 V 40 mA AQW216 AQW216A AQW216AX AQW216AZ *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator A and the packing style indicator X or Z are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25 C 77 F) Item Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V Input f = 100 Hz, Peak forward current IFP 1 A Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 60 V 100 V 200 V 350 V 400 V 600 V Continuous load 0.50 A 0.30 A 0.16 A 0.12 A 0.10 A 0.04 A Peak AC, DC IL current (0.60A) (0.35 A) (0.2 A) (0.14 A) (0.13 A) (0.05 A) ( ): in case of using only 1 channel Output A connection: 100 ms (1 shot), Peak load current Ipeak 1.0 A 0.9 A 0.48 A 0.36 A 0.3 A 0.12 A VL = DC Power dissipation Pout 800 mW Total power dissipation PT 850 mW Between input and output/between I/O isolation voltage Viso 1,500 V AC contact sets Non-condensing at low Operating Topr 40 C to +85 C 40 F to +185F Temperature temperatures limits Storage Tstg 40 C to +100 C 40 F to +212 F ds x615 en aqw21: 140509J 1 GU 2 Form A (AQW21P ) 2. Electrical characteristics (Ambient temperature: 25 C 77F) Item Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) Condition Typical 0.9 mA LED operate IFon IL = Max. current Maximum 3 mA Minimum 0.4 mA LED turn off Input IFoff IL = Max. current Typical 0.8 mA Typical 1.25 V (1.14 V at IF = 5 mA) LED dropout VF IF = 50 mA voltage Maximum 1.5 V IF = 5 mA Typical 0.83 2.3 11 23 30 70 On resistance Ron IL = Max. Maximum 2.5 4.0 15 35 50 120 Within 1 son time Output Off state leakage IF = 0 mA Maximum ILeak 1 A current VL = Max. Typical 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.31 ms 0.28 ms IF = 5 mA Turn on time* Ton IL = Max. Maximum 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms Typical 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms IF = 5 mA Turn off time* Toff IL = Max. Transfer Maximum 0.2 ms characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 V Maximum 1.5 pF Initial I/C isolation Minimum Riso 1,000 M 500 V DC resistance *Turn on/Turn off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Symbol Recommended value Unit Input LED current IF 5mA Q Dimensions Q Schematic and Wiring Diagrams Q Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. Please refer to our information on PhotoMOS Relays for Automotive Applications. REFERENCE DATA 1. Load current vs. ambient temperature 2.-(1) On resistance vs. ambient temperature 2.-(2) On resistance vs. ambient temperature characteristics characteristics characteristics Allowable ambient temperature: 40C to +85 C Measured portion: between terminals 5 and 6, 7 and 8 Measured portion: between terminals 5 and 6, 7 and 8 40F to +185 F LED current: 5 mA Load voltage: Max. (DC) LED current: 5 mA Load voltage: Max. (DC) Continuous load current: Max. (DC) Continuous load current: Max. (DC) 5 120 600 AQW212 100 500 AQW216 4 AQW215 400 80 3 AQW215 60 300 2 AQW214 40 200 AQW217 AQW212 AQW210 AQW210 1 20 100 AQW214 AQW217 AQW216 0 0 0 40 20 020 40 60 8085 100 40 20 0 20 40 60 8085 40 20 0 20 40 60 8085 Ambient temperature, C Ambient temperature, C Ambient temperature, C 2 ds x615 en aqw21: 140509J Load current, mA On resistance, On resistance,