For FPC FPC/FFC connectors (0.3mm pitch) Y3BL Back lock 0.6 mm low prole, with soldering terminal type FEATURES 1. Low prole (0.6 mm) and slim design 2. Compatible with FPC 0.2 mm thickness 3. High durability assured with proprietary soldering terminal 4. Time and effort can be reduced by delivering with lever open. 5. Wiring patterns can be placed under the connector. 6. Ni barrier with high resistance to solder creepage APPLICATIONS Smartphones, tablet PCs and other mobile devices DETAILED FEATURES Low prole and slim design Compatible with FPC 0.2 mm High durability assured with (Contact pitch: 0.3 mm) thickness proprietary soldering terminal Back lock type with a low prole height of The connector has a 0.6 mm low prole construction 0.6 mm. Slim construction of 3.35 mm however, it is compatible with FPCs that Housing damage is prevented when FPC depth (including lever) facilitates device are 0.2 mm thick, facilitating assembly is inserted incorrectly thanks to the two thinness and miniaturization. work. walls on the FPC inlet side being metal (soldering terminal). ORDERING INFORMATION ACCTB52E 201803-T 1FPC/FFC connectors Y3BL (0.3mm pitch) PRODUCT TYPES Packing Height Number of pins Part number Inner carton (1-reel) Outer carton 7 AYF350725 11 AYF351125 15 AYF351525 23 AYF352325 25 AYF352525 0.6 mm 5,000 pieces 10,000 pieces 27 AYF352725 31 AYF353125 39 AYF353925 45 AYF354525 51 AYF355125 Notes: 1. Order unit: For volume production: 1-inner carton (1-reel) units. For samples, please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics The followings show specications, when using an applicable FPC (thickness 0.20 mm) Item Specications Conditions Rated current 0.2A/pin contact (Max. 5A at total contacts) Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Dielectric strength 150V AC for 1 min. when the specied voltage is applied for one minute. Based on the contact resistance measurement method Contact resistance Max. 160m specied by JIS C 5402. Measurement of the maximum force applied until the Mechanical FPC holding force Min. 0.10N/pin contact pin contacts (initial) inserted compatible FPC is pulled out in the insertion axis characteristics direction while the connector lever is closed Ambient temperature 55 to +85C No icing. No condensation. Reow soldering: Peak temperature: 260C or less The initial specication must be satised electrically Soldering heat resistance (on the surface of the PC board around the connector and mechanically. terminals) Soldering iron: 300C within 5 sec. 350C within 3 sec. 55 to +85C (product only) Storage temperature No icing. No condensation. 40 to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 5 cycles, 1 553 30 Environmental Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 characteristics (with FPC mated) +3 contact resistance max. 160m 3 85 0 30 4 Max. 5 0 553 120 hours, Humidity resistance Conformed to IEC60068-2-78 insulation resistance min. 100M, (with FPC mated) Temperature 402C, humidity 90 to 95% R.H. contact resistance max. 160m 24 hours, Saltwater spray resistance Conformed to IEC60068-2-11 insulation resistance min. 100M, (with FPC mated) Temperature 352C, saltwater concentration 51% contact resistance max. 160m H2S resistance 48 hours, Temperature 402C, gas concentration 31 ppm, (with FPC mated) contact resistance max. 160m humidity 75 to 80% R.H. Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 51 pins: 0.05 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminal Copper alloy Ni on base, Pd + Au ash plating ACCTB52E 201803-T 2