Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Guaranteed at 85 CY/SY series Features Endurance 85 2000 h Product height (3.0 mm max.) High ripple current (5100 mA rms to 6300 mA rms max.) RoHS compliance, Halogen free Specifications Series CY / SY Category temp. range 55 to +85 Rated voltage range 4.0 V, 6.3V Rated cap. range 330 F to 470 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.1 CV (A) 2 minutes Dissipation factor (tan ) 0.06 (120 Hz / + 20 ) Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +85 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan ) 2 times of the initial limit DC leakage current 3 times of the initial limit +60 , 90 % RH, 500 h, No-applied voltage 4.0 V 6.3 V Capacitance change of Damp heat initial measurd value +60 %, 20 % +50 %, 20 % (Steady state) Dissipation factor (tan ) 2 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Polarity bar (Positive) Capacitance (F P P L W1 Lot No. R. voltage code Unit V Un i t R. voltage code g 4.0 Series L0.2 W10.2 W20.1 H0.2 P0.3 j 6.3 CY / SY 7.3 4.3 2.4 2.8 1.3 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07-Jul-17 W2 W2 HCY/SY series Characteristics list Case size (mm) Specification Min. Rated Packaging Capacitance Ripple Series voltage Part number *2 *3 (F) ESR Qty *1 (V) L W H current (m max.) (pcs) (mA rms) 4.0 470 7.3 4.3 2.8 5100 15 ECGCY0G471R 2000 CY 6.3 330 7.3 4.3 2.8 5100 15 ECGCY0J331R 2000 4.0 470 7.3 4.3 2.8 6300 9 ECGSY0G471R 2000 SY 6.3 330 7.3 4.3 2.8 6300 9 ECGSY0J331R 2000 *1: Ripple current (100 kHz / +45 ) *2: ESR (100 kHz / +20 ) *3: Please contact us when 500 pcs packing is necessary. Please refer to each page in this catarog for Reflow conditions and Taping specifications. Temperature coefficient of ripple current Temperature T 45 45 < T 65 65 < T 85 4.0 V to 6.3 V Coefficient 1.0 0.7 0.25 Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07-Jul-17