Aluminum Electrolytic Capacitors NEW Surface Mount Type Halogen-free FK series V type High temperature Lead-Free reflow (suffix : A) Features Country of origin Endurance105 2000 h Malaysia Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 6.3 V to 35 V Capacitance range 33 F to 1500 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 Characteristics Z (25 ) / Z (+20 ) 2 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z (40 ) / Z (+20 ) 3 3 3 3 3 Z (55 ) / Z (+20 ) 4 4 4 3 3 After applying rated working voltage for 2000 hours at +105 2 and then being stabilized at +20 , capacitors shall meet the following limits. Endurance Capacitance change Within 30 % of the initial value Dissipation factortan ) 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10 % of the initial value soldering heat Dissipation factortan ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.Hz) 120 1 k 10 k 100 k to Cap.F 33 to 470 0.65 0.85 0.95 1.00 680 to 1500 0.70 0.90 0.95 1.00 Marking Dimensions 0.3 max. A0.2 Example : 6.3 V 100 F Marking color : BLACK Negative polarity marking () Capacitance (F) 100 Series identification j FK L W Mark for Lead-Free Pressure Relief (10 and larger) products (Black dot) Reference size Unitmm Rated voltage code Lot number Size code D L A, B H I W P K +0.15 D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 0.20 +0.15 D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 R. voltage code UnitV 0.20 +0.15 j 6.3 E 25 E 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 0.20 A 10 V 35 F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 C 16 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20 D0.5 H B0.2 H K I P IAluminum Electrolytic Capacitors (SMD Type) FK(A)-HF series Characteristics list Endurance : 105 2000 h Min. Case size Specification Packaging Rated (mm) Capacitance voltag Size Q ty Part number Reflow (20 %) Ripple code *3 e Impedance *1 *3 (F) D L Taping current tan (V) () (pcs) (mA rms) 100 6.3 5.8 D 240 0.36 0.26 EEEFK0J101AL (5) 1000 220 6.3 5.8 D 240 0.36 0.26 EEEFK0J221AL (5) 1000 6.3 7.7 D8 280 0.34 0.26 EEEFKJ331XAL (5) 900 330 6.3 8.0 6.2 E 300 0.26 0.26 EEEFK0J331AL (6) 1000 470 8.0 10.2 F 600 0.16 0.26 EEEFK0J471AL (6) 500 1000 8.0 10.2 F 600 0.16 0.26 EEEFK0J102AL (6) 500 1500 10.0 10.2 G 850 0.08 0.26 EEEFK0J152AL (6) 500 150 6.3 5.8 D 240 0.36 0.19 EEEFK1A151AL (5) 1000 6.3 7.7 D8 280 0.34 0.19 EEEFKA221XAL (5) 900 220 8.0 6.2 E 300 0.26 0.19 EEEFK1A221AL (6) 1000 10 330 8.0 10.2 F 600 0.16 0.19 EEEFK1A331AL (6) 500 470 8.0 10.2 F 600 0.16 0.19 EEEFK1A471AL (6) 500 680 8.0 10.2 F 600 0.16 0.19 EEEFK1A681AL (6) 500 1000 10.0 10.2 G 850 0.08 0.19 EEEFK1A102AL (6) 500 47 6.3 5.8 D 240 0.36 0.16 EEEFK1C470AL (5) 1000 68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680AL (5) 1000 100 6.3 5.8 D 240 0.36 0.16 EEEFK1C101AL (5) 1000 150 6.3 7.7 D8 280 0.34 0.16 EEEFKC151XAL (5) 900 16 6.3 7.7 D8 280 0.34 0.16 EEEFKC221XAL (5) 900 220 8.0 6.2 E 300 0.26 0.16 EEEFK1C221AL (6) 1000 330 8.0 10.2 F 600 0.16 0.16 EEEFK1C331AL (6) 500 470 8.0 10.2 F 600 0.16 0.16 EEEFK1C471AL (6) 500 680 10.0 10.2 G 850 0.08 0.16 EEEFK1C681AL (6) 500 33 6.3 5.8 D 240 0.36 0.14 EEEFK1E330AL (5) 1000 47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470AL (5) 1000 68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680AL (5) 1000 6.3 7.7 D8 280 0.34 0.14 EEEFKE101XAL (5) 900 100 25 8.0 6.2 E 300 0.26 0.14 EEEFK1E101AL (6) 1000 150 8.0 10.2 F 600 0.16 0.14 EEEFK1E151AL (6) 500 220 8.0 10.2 F 600 0.16 0.14 EEEFK1E221AL (6) 500 330 8.0 10.2 F 600 0.16 0.14 EEEFK1E331AL (6) 500 470 10.0 10.2 G 850 0.08 0.14 EEEFK1E471AL (6) 500 33 6.3 5.8 D 240 0.36 0.12 EEEFK1V330AL (5) 1000 47 6.3 5.8 D 240 0.36 0.12 EEEFK1V470AL (5) 1000 68 6.3 7.7 D8 280 0.34 0.12 EEEFKV680XAL (5) 900 6.3 7.7 D8 280 0.34 0.12 EEEFKV101XAL (5) 900 35 100 8.0 10.2 F 600 0.16 0.12 EEEFK1V101AL (6) 500 150 8.0 10.2 F 600 0.16 0.12 EEEFK1V151AL (6) 500 220 8.0 10.2 F 600 0.16 0.12 EEEFK1V221AL (6) 500 330 10.0 10.2 G 850 0.08 0.12 EEEFK1V331AL (6) 500 *1: Ripple current (100 kHz / +105 *2: Impedance (100 kHz / +20 ) *3: tan (120 Hz / +20 ) If Part number exceeds 12 digits, voltage code is abbreviated as follows 0J J, 1A A, 1C C, 1E E, 1V V Please refer to the page ofReflow Profil andThe Taping Dimension. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20