EEH-ZC1E330R Panasonic

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZC series Hybrid High temperature lead-free reflow Features Endurance: 4000 h at 125 (High temperature / Long life) Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) High-withstand voltage ( to 80 V), Low LC (0.01 CV or 3 A) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) Vibration-proof product is available upon request. New lineup of 6.3 product. (6.3, 8, 10) AEC-Q200 compliant RoHS compliant Specifications Size code C D D8 F G Category temp. range 55 to +125 Rated voltage range 25 V to 50 V 25 V to 63 V 25 V to 80 V Nominal cap.range 10 F to 33 F 10 F to 56 F 22 F to 100 F 22 F to 220 F 33 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +125 2 , 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Endurance 1 Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit DC leakage current Within the initial limit +125 2 , 3000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Endurance 2 Dissipation factor (tan ) 200 % of the initial limit ESR 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +125 2 with no voltage applied and then being Shelf life stabilized at +20 ,capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value Damp heat (Load) Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V 33 F Standard Unit Marking color : BLACK 0.3 max. A0.2 Size H D L A, B I W P K code max. +0.15 5.0 5.80.3 5.3 6.5 2.2 0.650.1 1.5 0.35 C -0.20 Negative polarity marking () +0.15 6.3 5.80.3 6.6 7.8 2.6 0.650.1 1.8 0.35 D -0.20 Capacitance (F) +0.15 6.3 7.70.3 6.6 7.8 2.6 0.650.1 1.8 0.35 D8 -0.20 L W Series identification 8.0 10.20.3 8.3 10 3.4 0.900.2 3.1 0.700.2 F Pressure relief (10 ) ( ) Reference size 10.0 10.20.3 10.3 12.0 3.5 0.900.2 4.6 0.700.2 G Vibration-proof product 33 < Size codeD, D8 > < Size codeF, G > F A0.2 E ZC F A0.2 Rated voltage T T L W L W Lot number Supportive terminals Pressure relief (10 ) ( ) Reference size Supportive terminals ( ) Reference size R. voltage code UnitV Unit H E 25 Size code D L A, B F I W P K R S T max. +0.15 6.3 6.10.3 6.6 7.8 0 to +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 V 35 D -0.20 +0.15 H 50 D8 6.3 8.00.3 6.6 7.8 0 to +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 -0.20 J 63 F 8.0 10.50.3 8.3 10.0 0 to +0.15 3.4 1.20.2 3.1 0.700.2 0.700.2 5.3 1.30.2 K 80 G 10.0 10.50.3 10.3 12.0 0 to +0.15 3.5 1.20.2 4.6 0.700.2 0.700.2 6.9 1.30.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19 D0.5 D0.5 H H B0.2 B0.2 (S) K (I) (P) (I) R K (I) (P) (I) D0.5 H B0.2 (S) R K (P) (I) (I)Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZC series Characteristics list Endurance 1 : 125 4000 h Endurance 2 : 125 3000 h Case size Min. Specification Part number (mm) packaging q ty (pcs) Rated Capacitance *1 L Size Ripple current voltage (20 %) *2 Standard Vibration-proof code (mA rms) ESR *3 (V) D (F) tan Vibration Taping (m) product product Standard Endurance Endurance -proof 1 2 22 5.0 5.8 C 550 80 0.14 EEHZC1E220R 1000 550 1000 33 5.0 5.8 C 80 0.14 EEHZC1E330R 900 1000 47 6.3 5.8 6.1 D 50 0.14 EEHZC1E470P EEHZC1E470V 56 6.3 5.8 6.1 D 900 50 0.14 EEHZC1E560P EEHZC1E560V 1000 25 68 6.3 7.7 8.0 D8 1400 30 0.14 EEHZC1E680XP EEHZC1E680XV 900 100 6.3 7.7 8.0 D8 1400 30 0.14 EEHZC1E101XP EEHZC1E101XV 900 150 8.0 10.2 10.5 F 1600 1900 27 0.14 EEHZC1E151P EEHZC1E151V 500 220 8.0 10.2 10.5 F 1600 1900 27 0.14 EEHZC1E221P EEHZC1E221V 500 330 10.0 10.2 10.5 G 2000 2900 20 0.14 EEHZC1E331P EEHZC1E331V 500 550 1000 10 5.0 5.8 C 100 0.12 EEHZC1V100R 550 1000 22 5.0 5.8 C 100 0.12 EEHZC1V220R 33 6.3 5.8 6.1 D 900 60 0.12 EEHZC1V330P EEHZC1V330V 1000 47 6.3 5.8 6.1 D 900 60 0.12 EEHZC1V470P EEHZC1V470V 1000 35 68 6.3 7.7 8.0 D8 1400 35 0.12 EEHZC1V680XP EEHZC1V680XV 900 100 8.0 10.2 10.5 F 1600 1900 27 0.12 EEHZC1V101P EEHZC1V101V 500 150 8.0 10.2 10.5 F 1600 1900 27 0.12 EEHZC1V151P EEHZC1V151V 500 220 10.0 10.2 10.5 G 2000 2800 20 0.12 EEHZC1V221P EEHZC1V221V 500 2000 2800 500 270 10.0 10.2 10.5 G 20 0.12 EEHZC1V271P EEHZC1V271V 500 1000 10 5.0 5.8 C 120 0.10 EEHZC1H100R 22 6.3 5.8 6.1 D 750 80 0.10 EEHZC1H220P EEHZC1H220V 1000 33 6.3 7.7 8.0 D8 1100 40 0.10 EEHZC1H330XP EEHZC1H330XV 900 50 47 8.0 10.2 10.5 F 1250 30 0.10 EEHZC1H470P EEHZC1H470V 500 68 8.0 10.2 10.5 F 1250 30 0.10 EEHZC1H680P EEHZC1H680V 500 100 10.0 10.2 10.5 G 1600 28 0.10 EEHZC1H101P EEHZC1H101V 500 120 10.0 10.2 10.5 G 1600 28 0.10 EEHZC1H121P EEHZC1H121V 500 10 6.3 5.8 6.1 D 700 120 0.08 EEHZC1J100P EEHZC1J100V 1000 900 900 22 6.3 7.7 8.0 D8 80 0.08 EEHZC1J220XP EEHZC1J220XV 1100 500 33 8.0 10.2 10.5 F 40 0.08 EEHZC1J330P EEHZC1J330V 63 47 8.0 10.2 10.5 F 1100 40 0.08 EEHZC1J470P EEHZC1J470V 500 56 10.0 10.2 10.5 G 1400 30 0.08 EEHZC1J560P EEHZC1J560V 500 68 10.0 10.2 10.5 G 1400 30 0.08 EEHZC1J680P EEHZC1J680V 500 82 10.0 10.2 10.5 G 1400 30 0.08 EEHZC1J820P EEHZC1J820V 500 22 8.0 10.2 10.5 F 1050 45 0.08 EEHZC1K220P EEHZC1K220V 500 80 33 10.0 10.2 10.5 G 1360 36 0.08 EEHZC1K330P EEHZC1K330V 500 1360 500 47 10.0 10.2 10.5 G 36 0.08 EEHZC1K470P EEHZC1K470V *1: Ripple current (100 kHz/ +125 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Reflow profile and The taping dimensions. The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitanceC Frequency (f) 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz C < 47 F 0.10 0.10 0.15 0.20 Correction 47 F C < 150 F 0.15 0.20 0.25 0.30 factor 150 F C 0.15 0.25 0.25 0.30 Frequency (f) Rated capacitanceC 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz C < 47 F 0.30 0.40 0.45 0.50 Correction 47 F C < 150 F 0.40 0.45 0.55 0.60 factor 150 F C 0.45 0.50 0.60 0.65 Rated capacitanceC Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz C < 47 F 0.60 0.65 0.70 0.75 Correction 47 F C < 150 F 0.70 0.75 0.80 0.80 factor 150 F C 0.75 0.80 0.85 0.85 Frequency (f) 100 kHz f < 500 kHz Rated capacitanceC 40 kHz f < 50 kHz 50 kHz f < 100 kHz 500 kHz f C < 47 F 0.80 0.85 1.00 1.05 Correction 47 F C < 150 F 0.85 0.90 1.00 1.00 factor 150 F C 0.85 0.90 1.00 1.00 After endurance ESR100 kHz-40 Size code C D D8 F G ESR 2 1.4 0.8 0.4 0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19