Aluminum Electrolytic Capacitors/ FK
Surface Mount Type
Series: Type:
FK V
Features
Endurance: 2000 h to 5000 h at 105 C
Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
Vibration-proof product is available upon request. (08 mm and larger)
AEC-Q200 quali ed
RoHS directive compliant
Specifi cations
Category Temp. Range 55 C to +105 C
Rated W.V.Range 6.3 V.DC to 100 V.DC
Nominal Cap.Range 3.3 F to 6800 F
Capacitance Tolerance 20 % (120 Hz/+20 C)
DC Leakage Curre nt I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater)
tan d Please see the attached standard products list
W.V. (V) 6.3 10 16 25 35 50 63 80 100
Z(25 C)/Z(+20 C) 222222222
Characteristics
(Impedance ratio at 120 Hz)
at Low Temperature
Z(40 C)/Z(+20 C) 333333333
Z(55 C)/Z(+20 C) 444333333
After applying rated working voltage for 2000 hours at +105 C2 C and then being stabilized at +20 C,
Capacitors shall meet the following limits. ( > 012.5 and suf x G in 0810.2, 01010.2 are 5000 hours)
Capacitance change 30 % of initial measured value (Suf x G is 35 %)
Endurance
tan d 200 % of initial speci ed value (Suf x G is 300 %)
<
DC leakage current < initial speci ed value
After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized
Shelf Life
at +20 C, capacitors shall meet the limits speci ed in Endurance (With voltage treatment)
After re ow soldering and then being stabilized at +20 C, capacitors shall meet the following limits.
Capacitance change 10 % of initial measured value
Resistance to
Soldering Heat
tan d initial speci ed value
<
DC leakage current < initial speci ed value
Frequency correction factor for ripple current
Frequency (Hz)
50, 60 120 1 k 10 k 100 k to
Correction factor 0.70 0.75 0.90 0.95 1.00
Marking Di men sions in mm (not to scale)
(Unit : mm)
Example:6.3 V 22 F, 6.3 V 3300 F
Marking color : BLACK 0.3 max. A0.2
< 010
Capacitance (F)
Negative polarity
marking () Series identication
Mark for Lead-Free
K ',
Products Black Dot
+
(Square)
L W
Rated Voltage Mark
Lot number
Pressure Relief (010 and larger)
( ) Reference size
012.5
>
Capacitance (F)
Size
Negative polarity
DL A,B H I W P K
code
marking ()
Series identication
+ 1.5
B 4.0 5.80.3 4.3 5.5 max. 1.8 0.650.1 1.0 0.35
- 0.2
K ',
+ 1.5
C 5.0 5.80.3 5.3 6.5 max. 2.2 0.650.1 1.5 0.35
- 0.2
+ 1.5
D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.2
Rated Voltage Mark
Lot number
+ 1.5
D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35
- 0.2
Rated Voltage Mark + 1.5
E 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35
- 0.2
j 6.3 V H 50 V F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2
G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2
A 10 V J 63 V
H13 12.5 13.50.5 13.5 15.0 max. 4.7 0.900.3 4.4 0.700.3
C 16 V K 80 V
J16 16.0 16.50.5 17.0 19.0 max. 5.5 1.200.3 6.7 0.700.3
E 25 V 2A 100 V
K16 18.0 16.50.5 19.0 21.0 max. 6.7 1.200.3 6.7 0.700.3
V 35 V
This product qualify for AEC-Q200, but it has some deviations.
Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
EEE-41
0D0.5
H
B0.2
K
(I) (P)
(I)Aluminum Electrolytic Capacitors/ FK
Standard Prod ucts Endurance : 105 C 2000 h ( 012.5 : 5000 h)
>
Min.
Case size Speci cation
Packaging Q'ty
Cap.
Ripple Impedance tan d
W.V.
Part No.
(20 %)
Size Current Re ow
Dia. Length (RoHS:compliant) Taping
Code (100 kHz) (100 kHz) (120 Hz)
(+105 C) (+20 C) (+20 C)
(V) (F) (mm) (mm) (mA r.m.s.) ()(pcs)
22 4 5.8 B 90 1.35 0.26 EEEFK0J220R (1) 2000
45.8 (B) 90 1.35 0.26 EEEFK0J470UR (1) 2000
47
5 5.8 C 160 0.70 0.26 EEEFK0J470R (1) 1000
5 5.8 (C) 160 0.70 0.26 EEEFK0J101UR (1) 1000
100
6.3 5.8 D 240 0.36 0.26 EEEFK0J101P (1) 1000
220 6.3 5.8 D 240 0.36 0.26 EEEFK0J221P (1) 1000
6.3 6.3 7.7 D8 280 0.34 0.26 EEEFK0J331XP (1) 900
330
8 6.2 E 300 0.26 0.26 EEEFK0J331P (2) 1000
470 8 10.2 F 600 0.16 0.26 EEEFK0J471P (2) 500
1000 8 10.2 F 600 0.16 0.26 EEEFK0J102P (2) 500
1500 10 10.2 G 850 0.08 0.26 EEEFK0J152P (2) 500
3300 12.5 13.5 H13 1100 0.06 0.30 EEVFK0J332Q (3) 200
6800 16 16.5 J16 1800 0.035 0.36 EEVFK0J682M (3) 125
22 4 5.8 B 90 1.35 0.19 EEEFK1A220R (1) 2000
45.8 (B) 90 1.35 0.19 EEEFK1A330UR (1) 2000
33
5 5.8 C 160 0.70 0.19 EEEFK1A330R (1) 1000
150 6.3 5.8 D 240 0.36 0.19 EEEFK1A151P (1) 1000
6.3 7.7 D8 280 0.34 0.19 EEEFK1A221XP (1) 900
220
8 6.2 E 300 0.26 0.19 EEEFK1A221P (2) 1000
10 330 8 10.2 F 600 0.16 0.19 EEEFK1A331P (2) 500
470 8 10.2 F 600 0.16 0.19 EEEFK1A471P (2) 500
680 8 10.2 F 600 0.16 0.19 EEEFK1A681P (2) 500
1000 10 10.2 G 850 0.08 0.19 EEEFK1A102P (2) 500
2200 12.5 13.5 H13 1100 0.06 0.21 EEVFK1A222Q (3) 200
4700 16 16.5 J16 1800 0.035 0.25 EEVFK1A472M (3) 125
6800 18 16.5 K16 2060 0.033 0.29 EEVFK1A682M (3) 125
10 4 5.8 B 90 1.35 0.16 EEEFK1C100R (1) 2000
45.8 (B) 90 1.35 0.16 EEEFK1C220UR (1) 2000
22
5 5.8 C 160 0.70 0.16 EEEFK1C220R (1) 1000
5 5.8 (C) 160 0.70 0.16 EEEFK1C470UR (1) 1000
47
6.3 5.8 D 240 0.36 0.16 EEEFK1C470P (1) 1000
68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680P (1) 1000
100 6.3 5.8 D 240 0.36 0.16 EEEFK1C101P (1) 1000
150 6.3 7.7 D8 280 0.34 0.16 EEEFK1C151XP (1) 900
16
6.3 7.7 D8 280 0.34 0.16 EEEFK1C221XP (1) 900
220
8 6.2 E 300 0.26 0.16 EEEFK1C221P (2) 1000
330 8 10.2 F 600 0.16 0.16 EEEFK1C331P (2) 500
470 8 10.2 F 600 0.16 0.16 EEEFK1C471P (2) 500
680 10 10.2 G 850 0.08 0.16 EEEFK1C681P (2) 500
1500 12.5 13.5 H13 1100 0.06 0.16 EEVFK1C152Q (3) 200
3300 16 16.5 J16 1800 0.035 0.20 EEVFK1C332M (3) 125
4700 18 16.5 K16 2060 0.033 0.22 EEVFK1C472M (3) 125
10 4 5.8 B 90 1.35 0.14 EEEFK1E100R (1) 2000
22 5 5.8 C 160 0.70 0.14 EEEFK1E220R (1) 1000
5 5.8 (C) 160 0.70 0.14 EEEFK1E330UR (1) 1000
33
6.3 5.8 D 240 0.36 0.14 EEEFK1E330P (1) 1000
47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470P (1) 1000
68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680P (1) 1000
6.3 7.7 D8 280 0.34 0.14 EEEFK1E101XP (1) 900
100
8 6.2 E 300 0.26 0.14 EEEFK1E101P (2) 1000
25
150 8 10.2 F 600 0.16 0.14 EEEFK1E151P (2) 500
220 8 10.2 F 600 0.16 0.14 EEEFK1E221P (2) 500
330 8 10.2 F 600 0.16 0.14 EEEFK1E331P (2) 500
470 10 10.2 G 850 0.08 0.14 EEEFK1E471P (2) 500
1000 12.5 13.5 H13 1100 0.06 0.14 EEVFK1E102Q (3) 200
1500 16 16.5 J16 1800 0.035 0.14 EEVFK1E152M (3) 125
2200 16 16.5 J16 1800 0.035 0.16 EEVFK1E222M (3) 125
3300 18 16.5 K16 2060 0.033 0.18 EEVFK1E332M (3) 125
Size code( ):Miniaturization product
Please refer to the page of Re ow Pro le and The Taping Dimensions.
When requesting vibration-proof product, please put the last V instead to P
Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
EEE-42