ERJ-P06J102V Panasonic

Anti-Surge Thick Film Chip Resistors UPGRADE ERJ P, PA,PM type ERJ PA2, P03, PA3, P06, P08, PM8, P14 series Features ESD surge characteristics superior to standard metal film resistors High reliability : Metal glaze thick film resistive element and three layers of electrodes Suitable for both reflow and flow soldering High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03) 0.25 W : 0603 inch / 1608 mm size (ERJPA3) 0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14) 0.66 W : 1206 inch / 3216 mm size (ERJP08) High precision, High voltage, High resistance value (ERJPM8) -6 : Limiting element voltage 500 V, Resistance tolerance 1 %, TCR 100 (x 10 / K) Reference standard : IEC 60115-8JIS C 5201-8JEITA RC-2134C AEC-Q200 compliant RoHS compliant As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files. Explanation of part numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J P 0 6 D 1 0 0 2 V Product code Size, Power rating Resistance tolerance Resistance value Packaging methods Code inch size Power rating Tolerance Code Packaging Part No. Code The rst two or three digits are Thick film signicant gures of resistance and chip resistors PA2 0402 0.20 W D 0.5 Punched carrier Ttaping the third or fourth one denotes X ERJPA2 2 mm pitch, 10,000 pcs P03 0603 0.20 W F 1 number of zeros following. J 5 Three digit type (5 %), ERJP03 PA3 0603 0.25 W Four digit type (1 %, 0.5 %) ERJPA3 P06 0805 0.50 W Punched carrier taping Example: V ERJP06 4 mm pitch, 5,000 pcs P08 222 2.2 K ERJP08 1206 0.66 W 100210 K PM8 ERJPM8 P14 1210 0.50 W Embossed carrier taping U ERJP14 4 mm pitch, 5,000 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 27-Jul-21Anti-Surge Thick Film Chip Resistors Ratings Limiting Maximum Category *1 Resistance Resistance Power rating Part No. element overload T.C.R. temperature AEC-Q200 tolerance range (70 ) *2 *3 -6 (inch size) range Grade voltage voltage (10 /K) (%) () (W) () (V) (V) 0.5, 1 10 to 1 M (E24, E96) 100 ERJPA2 0.20 50 100 Grade 1 (0402) 5 10 to 1 M (E24) 200 0.5 10 to 1 M (E24, E96) 150 1 10 to 1 M (E24, E96) 200 ERJP03 0.20 150 200 Grade 0 (0603) : 150 to +400 R<10 5 1 to 1 M (E24) : 200 10R 0.5, 1 10 to 1 M (E24, E96) 100 ERJPA3 0.25 150 200 Grade 0 (0603) (105 ) 1 to 1.5 M (E24) 200 5 R<33 : 300 10 to 1 M (E24, E96) 0.5, 1 33R : 100 ERJP06 : 100 to +600 55 to +155 0.50 400 600 Grade 0 R<10 (0805) 5 1 to 3.3 M (E24) 10R<33 : 300 33R : 200 0.5, 1 10 to 1 M (E24, E96) 100 ERJP08 : 100 to +600 0.66 500 1000 R<10 Grade 0 (1206) 5 1 to 10 M (E24) : 200 10R ERJPM8 NEW 0.66 500 1000 1 1 M ~ 10 M (E24, E96) 100 Grade 0 (1206) 0.5, 1 10 to 1 M (E24, E96) 100 ERJP14 : 100~ to +600 0.50 200 400 R<10 Grade 0 (1210) 1 to 1 M (E24) 5 10R : 200 *1: Use it on the condition that the case temperature is below the upper category temperature. *2: Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Power Rating Resistance Value, or Limiting Element Voltage listed above, whichever less. *3: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum Overload Voltage listed above, whichever less. -55 70 105 Power derating curve 100 125 For resistors operated in rated temperatures 80 ERJP06, above 70 or 105 , power rating shall be ERJPA3 P08, 60 derated in accordance with the figure on the right. PM8 When the temperature of ERJP14 is 155 40 ERJPA2,P03, or less, the derating start temperature can be P14 20 changed to 125 . (See the dotted line) 155 0 -60 -40 -20 0 20 60 80 100 120 140 160 180 40 Ambient temperature () Construction Protective coating Electrode (Inner) Electrode (Between) Alumina substrate Electrode (Outer) Thick lm resistive element Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 27-Jul-21 Rated load (%)