Choke Coils Power Choke Coil Series: PCC-F126F (N6) Thin, compact and high power Features High power (Isat 20 A /100 C) Thin pro le (5.7 mm height)/SMD Low leakage ux RoHS compliant Recommended Applications Standard Packing Quantity DC-DC converter for driving PCs at high speed 500 pcs./Reel On-board power supply module for DC-DC converters (10 to 40 W) Explanation of Part Numbers 1 2 3 4 56 78 9 10 11 12 & 5 2 1 Product code Classication Size Winding Inductance Core Packaging Sufx Standard Parts Saturation Initial Inductance Heat DC re sis tance current inductance at at point current at 20 C at 25 C at 25 C T=40 C at 25 C at 100 C Parts No. Type DC I sat I sat R Tol. Tol. (A) (A) (m) 0 1 0 L (H) L (H) I (A) (%) (%) min. min. max. ETQP6F1R2HFA 2.3 1.2 14.3 11.7 14.2 2.24 30 30 ETQP6F2R0HFA 3.5 2.0 10.7 8.7 12.5 3.30 ETQP6F3R2HFA 4.8 3.2 8.6 7.1 10.8 4.92 ETQP6F4R6HFA HL 6.6 4.6 7.3 6.0 9.3 6.48 ETQP6F6R4HFA 8.3 25 6.4 25 6.2 5.2 7.9 8.64 ETQP6F8R2HFA 10.4 8.2 6.0 5.0 7.2 10.90 ETQP6F102HFA 12.5 10.2 4.7 4.0 6.5 13.30 ETQP6F1R0SFA 1.9 1.0 19.4 15.4 14.2 2.24 ETQP6F1R6SFA 2.8 1.6 14.9 12.2 12.5 3.30 SP ETQP6F2R5SFA 3.6 2.5 11.3 9.3 10.8 4.92 ETQP6F3R5SFA 4.9 3.5 9.5 8.0 9.3 6.48 30 30 ETQP6F0R8LFA 1.8 0.8 25.2 20.0 14.2 2.24 ETQP6F1R3LFA 2.5 1.3 18.6 15.8 12.5 3.30 ETQP6F2R0LFA LB 3.1 2.0 15.1 12.1 10.8 4.92 ETQP6F2R9LFA 4.1 2.9 12.0 10.0 9.3 6.48 ETQP6F4R1LFA 5.020 4.120 10.8 8.7 7.9 8.64 (Note1) Inductance is measured at 100 kHz (Note2) For de nitions of L0 & L1 please see the next page (Note3) Saturation current (I sat) is the current value that inductance (L1) decreases to 80 % of initial value. (Note4) Heat current (I0) is the actual value of the current at which the temperature rise of the coil becomes 40 dc from its initial (ambient temperature) value. The case temperature of the power choke coil is determined by the ambient temperature plus the heat generated by the operating current. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2012Choke Coils 0 1 Figure 1: L ,L :De nfi ition DC Bias Characteristic L0 L1 L0 : (Initial Inductance) Inductance when Idc is zero L1 : (Inductance at at point) point where the measured inductance is 80 % of its initial value 0 0 Idc (A) Figure 2: Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 12.50.3 6 Date code MARKING 2.0 10.8 2.0 ( ) : Reference value 0.05 min.: Clearance between 0.6 min. 2.1 min. the Terminal surface and the case surface 1.20.2 (10.0) 1.20.2 0.3 min.: Clearance between the Terminal surface 1.30.2 and the surface of the molded resin case Packaging Methods, Soldering Conditions and Safety Precautions (Power Choke Coils for Consumer use) Please see Data Files Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2012 8.00.2 L (H) 12.50.4 5.00.1 5.7 max. (6.0) 8.00.2 5.6