JS1A12F

VDE JS MINIATURE PC BOARD TYPE JS RELAYS POWER RELAY FEATURES 22 Miniature size with universal terminal footprint 16 .866 .630 High contact capacity: 10 A Class B coil insulation type available 16 .630 TV-5 type available (Standard type) 1 Form A type TV-5 1 Form C type TV-5 (N.O. side only) VDE, TV also approved mm inch Sealed construction for automatic cleaning (Standard type) SPECIFICATIONS Contact Characteristics Types Standard type High power type Max. operating speed 20 cpm 1 Form A, Standard High power Arrangement 1 Form A Types 1 Form C type type Initial contact resistance, max. Initial insulation resistance Min. 100 M (at 500 V DC) 100 m (By voltage drop 6 V DC 1 A) Between open contacts 750 Vrms for 1 min. Initial Contact material Silver alloy breakdown Between contacts and 1,500 Vrms for 1 min. 1 voltage* 10 A 250 V AC 10 A 250 V AC coil Nominal switching 10 A 125 V AC 10 A 125 V AC 2 Operate time* capacity Approx. 10 ms 6 A 277 V AC 10 A 277 V AC (at nominal voltage) Rating Max. switching power 2,500 VA 2 Release time(without diode)* (at nominal (resistive Approx. 10 ms Max. switching voltage 250 V AC, 100 V DC voltage) load) Max. switching current 10 A (AC), 5 A (DC) Max. 35C, resistive, nominal voltage Min. switching 100 mA, 5 V DC Temperature rise (at nominal voltage) applied to coil. 1 capacity Contact carrying current: Mechanical 7 10A, at 85C 185F 10 (at 180 cpm) 3 2 Functional* Min. 98 m/s 10 G Electrical at 10 A Shock resistance 4 2 Destructive* Min. 980 m/s 100 G 125 V AC, 2 6 A 277 V AC resistive Approx. 98 m/s 10 G , 5 5 10 210 5 Expected (standard) Functional* 10 to 55 Hz at double life (min. 10 A 277 V AC amplitude of 1.6 mm Vibration resistance ope.) resistive (High power) 2 Approx. 117.6 m/s 12 G , 10 A 250 V AC Destructive 10 to 55 Hz at double 4 resistive 5 10 amplitude of 2 mm 5 (Standard: at 20 cpm) (No contact 1.5 10 40C to 40C to Conditions for operation, (High power: at 20 only) 6 Ambient +85C +105C transport and storage* cpm, 105C 221F)** 7 temp.* 40F to 40F to (Not freezing and ** Holding voltage should be 60% V of nominal voltage +185F +221F condensing at low temperature) Humidity 5 to 85% R.H. Coil Unit weight Approx.12 g .423 oz Nominal operating power 360 mW 4 1 This value can change due to the switching frequency, environmental conditions, * Half-wave pulse of sine wave: 6ms 5 and desired reliability level, therefore it is recommended to check this with the * Detection time: 10 s 6 actual load. * Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT Remarks 7 * When using relays in a high ambient temperature, consider the pick-up voltage 1 * Detection current: 10mA rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F 2 * Excluding contact bounce time with 20C 68F as a reference) and use a coil impressed voltage that is within the 3 * Half-wave pulse of sine wave: 11ms detection time: 10 s maximum allowable voltage range. TYPICAL APPLICATIONS 1. Home appliances 3. Ofce machines Air conditioner, heater, etc. PPC, facsimile, etc. 2. Automotive 4. Vending machines Power-window, car antenna, door-lock, etc. All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd. JS ORDERING INFORMATION Ex. JS 1a F B 12V F Contact arrangement Protective construction Coil insulation class Coil voltage (DC) Environmental support 1: 1 Form C (Standard) Nil: Sealed type Nil: Class E insulation 5, 6, 9, 12, 18, F: RoHS Directive conforming type (AgSnO2 type) 1a: 1 Form A (Standard) F: Flux-resistant type B: Class B insulation 24, 48 V Nil: RoHS Directive non-conforming type 1aP: 1 Form A (High Power) (AgCdO type) UL/CSA, VDE, TV (Standard type only) approved type is standard. Notes: 1. Standard packing: Carton: 100 pcs. Case: 500 pcs. 2. When ordering TV rated (TV-5) types, add suffix -TV. 3. Contact arrangement 1aP type is Flux-resistant type only (class B or class F insulation). Please consult us for coil insulation class F. COIL DATA Part No. Nominal Pick-up Drop-out Coil Nominal Max. operating Standard type High Power type Nominal voltage, voltage, resistance, operating allowable current, voltage, V DC (max.) V DC (min.) (10%) power, mW voltage Flux-resistant mA (10%) Sealed type Flux-resistant type V DC (at 20C (at 20C (at 20C (at 20C (at 85C type (at 20C 68F) 68F) 68F) 68F) 185F) 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A 68F) JS1a-5V (-F) JS1-5V (-F) JS1aF-5V (-F) JS1F-5V (-F) JS1aPF-B-5V (-F) 5 3.5 0.5 69.4 72 JS1a-6V (-F) JS1-6V (-F) JS1aF-6V (-F) JS1F-6V (-F) JS1aPF-B-6V (-F) 6 4.2 0.6 100 60 130%V JS1a-9V (-F) JS1-9V (-F) JS1aF-9V (-F) JS1F-9V (-F) JS1aPF-B-9V (-F) 9 6.3 0.9 225 40 of JS1a-12V (-F) JS1-12V (-F) JS1aF-12V (-F) JS1F-12V (-F) JS1aPF-B-12V (-F) 12 8.4 1.2 400 30 360 nominal JS1a-18V (-F) JS1-18V (-F) JS1aF-18V (-F) JS1F-18V (-F) JS1aPF-B-18V (-F) 18 12.6 1.8 900 20 voltage JS1a-24V (-F) JS1-24V (-F) JS1aF-24V (-F) JS1F-24V (-F) JS1aPF-B-24V (-F) 24 16.8 2.4 1,600 15 JS1a-48V (-F) JS1-48V (-F) JS1aF-48V (-F) JS1F-48V (-F) JS1aPF-B-48V (-F) 48 33.6 4.8 6,400 7.5 mm inch DIMENSIONS Schematic (Bottom view) 1a N.O. 16 COM .630 COIL 0.4 .016 3.9 .154 1c 0.24 .009 N.O. 0.8 0.8 .031 .031 COM COIL 0.4 N.C016 2 3 N.O. PC board pattern (Bottom view) 12 16 1 1a .472 .630 1.2 4 N.C. 5 (Standard, High Power) .047 4-1.3 dia. 0.4 4-.051 dia. 2.3 .016 .091 12.2 2 .480 .079 22 .866 12 .472 Note: Terminal No. 4 is only for Standard 1 Form C type 12.2 2 General tolerance: 0.3 .012 .480 .079 1c (Standard) 5-1.3 dia. 5-.051 dia. 12 .472 12.2 2 .480 .079 Tolerance: 0.1 .004 All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.