ACB02 Panduit

SmartZone G5 Electronic Swinghandle with Optional Built-In Card Reader SPECIFICATION SHEET specifications Panduit Electronic Swinghandle provides intelligent electronic locking and monitoring capabilities with or without an integrated card reader. The Swinghandle is part of the door access and control range of sensors and can be installed as part of a rack access control topology, where captured data is transmitted to, and retained within, a connected SmartZone G5 iPDU. This data can be used to manage access control through a SmartZone G5 iPDU WebUI, or through the SmartZone DCIM Software Platform. Third Party DCIM Software Suites also supported through the SNMP protocol. technical information Dimensions: With card reader - 8.27 inches x 1.46 inches (210 x 37 mm) Without card reader - 6.6 inches x 1.46 inches (168 mm x 37 mm) key features and benefits Door Access and Controls access to a rack or cabinet in a data center and provides physical status of a door. Control Monitoring Optional combined Integrated Prox Card Reader allows wireless direct access to authorized personnel. electronic lock and card reader Cabinet Compatibility Seamlessly integrates into a Panduit Net Access N-Type or S-Type Cabinet. Many 3rd party cabinets also supported. See dimensions to confirm interoperability. Interface Connection Must use Access Hub and respective Cold or Hot aisle harnesses depending on selected electronic swinghandle. SmartZone Software Captures data that is consolidated by connected SmartZone G5 iPDU then utilized by SmartZone Suite Integration Software for real-time monitoring management and automated documentation. applications The SmartZone Swinghandle with optional built-in Prox Card The SmartZone Swinghandle connects directly to Reader enables effective door access and control. These SmartZone G5 iPDU via an Access Hub and respective sensors are designed for indoor mounting to a rack or cabinet Access Hub Harnesses (sold separately) and transmits real-time in a data center. information to SmartZone DCIM Software to provide notification of handle status. www.panduit.com SmartZone G5 Electronic Swinghandle with Optional Built-In Card Reader technical specification Parameters With card reader Degree of Protection IP55 Electrical Connection to the Gateway RJ45 Sensor Supply Voltage Range 12V DC Operating Current Less than 200 mA at 12V DC Peak/Stall Current 100 mA (1 Amp) Input Signal 125kHz (Prox Card Reader) & 13.56 MHz (26 bits of data) Not applicable to standard swinghandle kit without integrated card reader. Output Signal 200 mA max. load Standby Current 50 mA max. Operating Temperature 32F to 149F (0C to 65C) Card Proximity Distance 70mm (2.75 inches) Not applicable to standard swinghandle kit. Not applicable to standard swinghandle kit without integrated card reader. swinghandle with or without integrated card reader Integrated Prox Card Reader Handle Handle LED Electronic LED Electronic Status Indicator Status Indicator DIN Profile Cylinder DIN Profile Cylinder Electronic Locking Mechanism Electronic Locking Mechanism ACE02 ACE01 swinghandle access hub and wire harnesses assemblies ACB01 Example assembly ACB02 ACB04 www.panduit.com