45 Angled Mini-Com TX6A and SPECIFIC A TION SHEET TX6 PLUS Shielded Jack Modules specifications Category 6A/Class EA and Category 6/Class E, 8-position, Angled Shielded Jack 45 Angled Mini-Com TX6A and TX6 Module shall terminate 4-pair, 22 26 AWG, 100 ohm shielded twisted pair cable PLUS Shielded Jack Modules* and shall not require use of a punch down tool. Angled Shielded Jack Modules shall provide option for either up or down, or left or right, 45 angled cable entry into rear of Left/Right 45 Angled Jacks (Black) jack module. Angled Shielded Jack Modules shall use a forward motion termination TX6A CJSLR6X88TGY method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The termination cap shall be color-coded to designate performance TX6 PLUS CJSLR688TGY level and shall include a label coded for T568B wiring scheme. Up/Down 45 Angled Jacks (Black) TX6A CJSUD6X88TGY TX6 PLUS CJSUD688TGY technical information 45 Angled Wire Caps for Mini-Com Shielded Jack Modules Channel and component Exceeds channel requirements of ANSI/TIA-568.2-D and ISO 11801 standards for the respective Category or Class performance levels at the designated swept frequencies for performance: that Category or Class. Meets component requirements of ANSI/TIA-568.2-D and ISO 11801 Left/Right 45 Angle Caps standards for the respective Category or Class performance levels at the designated swept TX6A : CJSLRCAPBU-X frequencies for that Category or Class. TX6 PLUS: CJSLRCAPIW-X Complies with ANSI/TIA-1096A (formerly FCC Part 68) contacts plated with 50 microinches FCC compliance: TX5e : CJSLRCAPRD-X of gold IEC compliance: Meets IEC 60603-7 and IEC 60512-99-001 Up/Down 45 Angle Caps TX6A : CJSUDCAPBU-X Operating temperature: -10 C to 65 C (14 F to 149 F) TX6 PLUS: CJSUDCAPIW-X Meets IEEE 802.3af / 802.3at and 802.3bt type 3 and type 4 for up to 100W PoE compliance: TX5e : CJSUDCAPRD-X UL Listed: UL 1863 (Use as communications circuit accessory) UL 2043 (Suitable for use in air-handling spaces) Tools and Accessories RoHS compliance: Compliant Angled Jack Module TGSJT termination tool: Wire cap compatible with 22 26 AWG solid or stranded cable with conductor insulation Cable and conductor diameters of 0.060 in. max and overall cable O.D. 0.200 in. to 0.330 in. termination range: Wire snipping tool: CWST Wire stripping tool: CJAST Depth reduction Allows up to 55% reduction in cable routing depth compared to straight exit wire cap when both allow proper cable bend radius for 0.275 in. (6.99 mm) diameter cable (0.500 with angled caps provided: Block out device: PSL-DCJB vs. 1.100 with straight exit caps) *For other colors for Angled Shielded Jack Modules, please see panduit.com key features and benefits Angled cable exit Large diameter cables can be routed to jacks in tight spaces while maintaining proper bend radius, ensuring proper performance and enabling easy cable dressing in high density applications like patch panels Reversible direction Each modular jack comes with a wire cap which can be inserted in either of two directions, so that only one jack type is needed to route cable in up or down directions, or left or right design directions Confidence that each jack module will deliver the critical electrical performance requirements 100% performance tested Optimizes performance by eliminating conductor untwist and reduces installation time Utilizes enhanced and expense Giga-TX Technology Provides a 360 conductive path to ground shielded jack module with no additional Integral shield assembly required Shield provides seamless bonding of the jack module with Mini-Com All Metal Modular Snap in grounding Patch Panels Modular Shielded jack modules snap in and out of all Mini-Com Faceplates, Metal Modular Patch Panels and Surface Mount Boxes for easy moves, adds, and changes Individually serialized Marked with quality control number for future traceability Able to support 48 ports in 1RU density High density TGSJT termination tool ensures conductors are fully terminated by utilizing a smooth forward Termination tool motion without impact on critical internal components for maximum reliability applications 45 Angled Mini-Com TX6A and TX6 PLUS Shielded Jack accommodates the larger bundle diameter and bigger bend Modules may be used wherever an angled cable exit from radius of Category 6A cable. the modular jack is desired and in confined jack mounting spaces such as in modular furniture, raceway, and wall 45 Angled Shielded Jack Modules are also useful in high outlets with conduit. 45 Angled Shielded Jack Modules are density rack cabling where they reduce horizontal cabling especially beneficial for use with Category 6A cabling which bulk by as much as 50% and more directly feed shielded is increasingly being deployed in office and furniture cables into pathways for easier cable management. applications, since their angled routing better www.panduit.com 45 Angled Mini-Com TX6A and TX6 PLUS Shielded Jack Modules Test Results Mechanical Test Test Method Measurement Test Results Normal Force Load (grams) >100 Vibration IEC 512-6d Circuit Resistance (mOhms) <40 Shock IEC 512-6c Contact Disturbance (microseconds) <5 Durability IEC 512-9a Circuit Resistance (mOhms) <40 Mating Force (N) <20 Mating/Un-mating IEC-512-3b Un-mating Force (N) <20 Termination Cycles IEC 352 Number of Cycles >20 Mating Cycles IEC 60603-7 Number of Plug Insertions >2500 Electrical Test Test Method Measurement Test Results Low Level Circuit Resistance IEC 512-2a Resistance (mOhms) <20 Dielectric Withstand Voltage IEC 512-4a 1000 VAC, 1 minute Passed Insulation Resistance IEC 512-3a Resistance (mOhms) >500 Electrical Test Test Method Measurement Test Results Temperature Life IEC 512-9b Circuit Resistance (mOhms) <40 Humidity IEC 512-11c Circuit Resistance (mOhms) <40 Thermal Shock IEC 512-11d Circuit Resistance (mOhms) <40 Climatic Sequence IEC 512-11a Circuit Resistance (mOhms) <40 Flowing Mixed Gas Corrosion IEC 512-11g Circuit Resistance (mOhms) <40 Left/Right 45 Angled Shielded Jack Module Up/Down 45 Angled Shielded Jack Module .74 .74 18.8 18.8 .62 .62 15.9 15.9 1.74 1.73 44.1 44.1 Dimensions are in inches. Dimensions in brackets are metric . WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2019 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP456--WW-ENG or by phone: 800.777.3300 9/2019