PanMPO Reference Cable Assemblies SPECIFICA TION SHEET technical information PanMPO Reference Cable Assemblies are pre-terminated 12-fiber reference grade MPO-compatible assemblies that are used to perform permanent link testing to commission and certify MPO-based structured cabling to international and domestic cabling standards. These reference cable assemblies are terminated with reference grade PanMPO Connectors on both ends that allow for any combination of gender and polarity cable plant to be tested using single jumper referencing methods. PanMPO Reference Cords contain connectors that display nominal optical and geometrical characteristics. application For testing MPO-based cable plant in support of 40GBASE-SR, 100GBASE-SR10, and 40GBASE-SR4 applications. Reference quality MPO cords must be used to ensure accurate, repeatable and reproducible measurements for permanent link certification. Reference Cable Assemblies with PanMPO Connectors provide contractors the capability to maintain high measurement integrity over time through the ability to retract the alignment pins in the connector for effective cleaning of the complete MPO connector surface. construction physical properties Cable type: Round jacketed 3.0mm Cable outside diameter (OD): 3.0mm Cable Plenum (OFNP) Minimum bend radius: 30mm jacket ratings: Cable retention strength: 50N Fiber types: OM3 - 50/125m* Cable flex: 100 cycles 4.9N OS2 - 9/125m Cable twist: 10 cycles 15N Connector PanMPO Female types end A: Connector durability: 500 mating cycles Connector Yellow color, end A: Fiber count: 12 Jacket color: Aqua - OM3 Yellow - OS2 Connector PanMPO Female types, end B: Connector Yellow color, end B: optical properties environmental properties Maximum 0.25dB Storage and shipping -40C to +70C connector temperature: insertion loss: Operating and installation 0C to +70C temperature: Minimum 30dB - OM3 connector 65dB - OS2 return loss: standards Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1, RoHS compliant. *Compatible for testing OM3/OM4 cable plant www.panduit.com PanMPO Reference Cable Assemblies part number CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 EXAMPLE F R B X R 7 - R 7 M 0 2 5 Connector A Quality 9 Connector B 1 Fiber Product F = Fiber R = Precision Reference 7 = PanMPO Female 6 Connector A 10 Unit of Length 2 Cable Type 7 = PanMPO Female M = Meters R = Reference 7 DASH 11,12 Length 3 Fiber Count 8 Connector B Quality (standard length is 2m) B = 12 fiber round jacketed R = Precision Reference 4 Fiber Type X = OM3, 50/125m* 9 = OS2, 9/125m cable assembly detail Key Up Cable Female Key Down Female Serialized Label (Red) Key Up Male Key Down Connector 2 (Female Connector Shown) Male Connector 1 (Male Connector Shown) Length *Compatible for testing OM3/OM4 cable plant WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2014 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com FBSP80--WW-ENG or by phone: 800.777.3300 11/2014