SmartZone G5 Intelligent Power Distribution Units (iPDUs) SPECIFICATION SHEET overview The Panduit SmartZone G5 iPDU is more than a power distribution unit and energy meter. These iPDUs monitor the data center power and environment (at the rack or cabinet level), by continuously scanning for electrical circuit overloads, and physical environmental conditions that place critical IT equipment at risk. Panduits iPDUs provide comprehensive, accurate, energy measurement data to efficiently use power resources, make informed capacity planning decisions, improve uptime, measure PUE (power usage effectiveness), and drive green data center initiatives to save energy and money. Making the right choice in IT equipment is essential for a safe, efficient data center operation. Our full range of iPDUs, environmental sensors, and dual locking power cords are the key to fulfilling missioncritical data center needs. technical information Dimensions: Height Inch (mm) Width Inch (mm) Depth Inch (mm) 1U: 1.6 (40.6) 17.5 (444.5) 2.0 (50.8) 1U: 1.7 (43.2) 17.5 (444.5) 7.8 (198.1) 1U: 1.7 (43.2) 17.5 (444.5) 10.6 (269.2) 2U: 3.4 (86.4) 17.5 (444.5) 7.8 (198.1) 0U HALF: 32.2 (817.9) 2.0 (50.8) 2.1 (53.3) 0U HALF (2 sided): 36 (914.4) 2.0 (50.8) 4.4 (111.8) 0U MID: 58.7 (1491) 2.0 (50.8) 2.1 (53.3) 0U FULL: 68.9 (1750.1) 2.0 (50.8) 2.1 (53.3) 0U FULL (2 sided): 71.7 (1821.2) 2.0 (50.8) 4.4 (111.8) 0U Full +: 74.6 (1896) 2.0 (50.8) 2.1 (53.3) 0U Full Wide: 68.9 (1750.1) 3.3 (83.8) 2.1 (53.3) 0U Full Wide +: 74.0 (1880) 3.3 (83.8) 2.1 (53.3) Mounting: Vertical units provide up to 48 outlets and without encroaching on the EIA space. Horizontal units provide up to 16 outlets and mount in standard (1U or 2U) TIA/EIA rack space. key features and benefits HotSwappable Replace the controller and display module without having to power down Controller the rack Redundant Network Specifically designed for Landlord/Tenant (Co-Los) allowing for remote Access access of real-time, vital statistics and operating information on two separate, secure networks Hardened Security Not only Physical but hardened Digital Security layers within the firmware LDAP, SNMP v3, TLS 1.2, Encrypted Security allows for Panduit PDUs to pass standard certified security scans 1GB Ethernet The 1G controller is compatible with the new Data Center Network switches being deployed - reducing special network configurations/ resources required to support the iPDU Plug & Play Sensors Digital sensors not only allow for multiple sensors on the same bus but also identify themselves to the controller to simplify setup & commissioning Multi-Color PDUs Different color PDUs simplify power feed identification & management. The new Panduit Intelligent PDUs are available in Black, White, Red, Blue, Yellow or Green Mobile & Desktop The intelligent PDUs feature an enhanced designed web interface which Friendly Web GUI detects the type of device that you are on and automatically adjusts the screen for an optimal experience Outlet Density Meets demands of densely packed IT equipment in rack or cabinet space Form Factor Optimal form factor enables efficient rack space utilization Operating Temperature 60C ambient at full load for operational reliability in high temperature areas (continued pg. 2) www.panduit.com SmartZone G5 Intelligent Power Distribution Units (iPDUs) key features and benefits (continued) Cable Retention Innovative cable tie accepting outlets allow for secure cord retention (C13 & C19 only) using a cable tie for added safety and security. (Panduit part number: PLT2I-C0) Circuit Breakers Protects data center equipment for increased reliability by interrupting potentially hazardous circuit over-current conditions* Color Coded Circuits* Easily identify phase to outlet banks to aid in fault isolation or load balancing External Chassis Meets NEC requirements and installation guidelines for IT equipment Ground Load Balancing Monitored through visual display on oLED (for 3 phase units only) Multiple Input Plug A full breadth offering to seamlessly interoperate with existing building power wiring schemes Options Multiple Mounting Enables simple out of the box commissioning and flexibility with Panduit cabinets and industry Options standard mounting features enabling installation into third party cabinets Mounting Buttons Allows tool-less mounting of rack PDUs for faster installations on vertical 0U units Supported Metering Frequency, VA, PF, plus aggregate and per phase Amperage, Voltage, Wattage, and Kilowatts per hour * Applies to products outfitted with circuit breakers iPDU product families MI Series: Rack PDUs that have the ability for aggregate power monitoring to quickly identify potential power issues, and reclaim available or under-utilized power capacity. MS Series: Rack PDUs that have the ability for aggregate power monitoring and outlet level switching capabilities for individual outlets or a group of outlets. Enabling power sequencing, rebooting equipment or restrict unauthorized use of individual outlets. MPO Series: Rack PDUs that have the ability for outlet level (and aggregate) power monitoring to quickly identify potential power issues, and reclaim available or under-utilized power capacity at the outlet level enabling the redeployment or decommissioning of individual servers to reclaim available or under-utilized power capacity. MSPO Series: Rack PDUs that have the ability for outlet level (and aggregate) power monitoring and outlet level switching capabilities for individual outlets or a group of outlets. Power monitoring at the individual outlet level provides actionable management data on the power consumption of each connected IT device enabling the redeployment or decommissioning of individual servers to reclaim available or under-utilized power capacity. Ideal for remote power reset, and cabinet power on sequencing and restrict unauthorized use of individual outlets. electrical specifications North America International models Input Voltage Single-Phase 120V Single-Phase 240V Single-Phase 208V Three-Phase Wye 240/415V (for Japan 415V only) Three-Phase Delta 208V Three-Phase Wye 120/208V Three-Phase Wye 415V Input Current (per phase) North America International models 15A, 20A, 30A, 50A, 60A 16A, 32A Input Power North America International models 1.4 17.3 (kVA) 3.7 22 (kVA) Input Frequency 50/60 Hz Output Voltage 120 - 240 VAC Maximum output current (outlet) IEC C13: 10A IEC C19: 16A NEMA 5-20R: 16A Overload protection (where applicable) Circuit Breakers, hydraulic magnetic 10 kAIC Circuit Breakers for all 415V models for North America