PoE Extenders SPECIFIC A TION SHEET SPECIFIC A TION SHEET specifications The PoE Extenders shall deliver 10/100Mbps full PoE Extender Kits duplex data and shall deliver up to 50W PoE at POEXKIT1 1-Port Extender Kit includes: lengths up to 2000 ft. (610m) over standard 2 or 1 x POEXTX1 1-port transmitter box 4-pair twisted-pair cable. The PoE Extenders shall reduce the additional costs and disruptions 1 x POEXRX1 1-port receiver box associated with other products or solutions. 1 x 60W, 55V power supply POEXKIT1-NP PoE Extenders Kit, includes 1 port transmitter and receiver box, 60W power technical information supply, no power plug Part Number POEXTX1 POEXRX1 POEXKIT4 4-Port Extender Kit includes: Model type: Transmitter Receiver 1 x POEXTX1 1-port transmitter box 1 x POEXRX4 4-port receiver box Dimensions: 8.91cm x 5.03cm x 2.57cm (LxWxH) 1 x 110W, 55V power supply 3.51 x 1.98 x 1.01 (LxWxH) POEXKIT4-NP PoE Extenders Kit, includes Weight: 114g (4 oz.) 1 port transmitter and Interface on both sides: 1 RJ45 port to 1 RJ45 port receiver box, 110W power supply, no power plug Power consumption: 1.5W PoE Extender Transmitters RoHS compliance: Compliant POEXTX1 1-port transmitter box UL rated: UL 60950-1 PoE Extender Receivers Data support capability: Switch and End IP Device must both be capable of transmitting at the same POEXRX1 1-port receiver box data rate of either 10BASE-T (for 10Mbps) or 100BASE-TX (for 100Mbps) Field-term Plugs PoE support capability: End IP device must be IEEE 802.3af/at compliant RJ45 Plug, 4-pair, Category 5e, 6, Operating temperature: -40C to 70C (-40F to 158F) 6A compatible FP6X88MTG Mean time before failure: 20+ years UTP Copper Cable (MTBF) PUO6C04BL-U = Category 6 Outside plant Humidity: 10% to 95% (non-condensing) at 35C (OSP), 1,000 ft. Reel Cable requirements: Required: 24 AWG 2-pair Category 5e PUO6C04BL-UQ = Category 6 Outside plant Recommended: 23 AWG 4-pair Category 6 (OSP), 2,000 ft. Reel PUP6004BU-W = Category 6 Plenum Supported data rate: 10/100Mbps full duplex (CMP), 1,000 ft. Reel Optional Power Supply: The PoE Extenders will accept an optional power supply with an output of PUR6004BU-W = Category 6 Riser 55 VDC, 2 amperes (37 to 56 VDC required, 48 to 55 VDC recommended) (CMR), 1,000 ft. Reel PUR6C04BU-UQ = Category 6 Riser (CMR), 2,000 ft. Reel Part Number POEXTX1 POEXRX4 UTP Patch Cords Model type: Transmitter Receiver UTPSP*Y Category 6, UTP with Dimensions: 8.91cm x 5.03cm x 2.57cm (LxWxH) 9.86cm x 9.66cm x 2.57cm (LxWxH) TX6 Modular Plugs 3.51 x 1.98 x 1.01 (LxWxH) 3.88 x 3.80 x 1.01 (LxWxH) Tools and Accessories Weight: 114g (4 oz.) 214g (7.6 oz.) EGJT-1 (for FP6X88MTG) C13CORD-F Power Cord, 3-pin, Interface on both sides: 1 RJ45 port to 1 RJ45 port 1 RJ45 port to 4 RJ45 ports 10A, 2m, IEC320-C13 Power consumption: 1.5W to CEE 7/7 (EU) C13CORD-G Power Cord, 3-pin, RoHS compliance: Compliant 10A, 2m, IEC320-C13 UL rated: UL 60950-1 to BS1363A (UK) C13CORD-I Power Cord, 3-pin, Data support capability: Switch and End IP Device must both be capable of transmitting at the same 10A, 2m, IEC320-C13 data rate of either 10BASE-T (for 10Mbps) or 100BASE-TX (for 100Mbps) to GB2099 (China) PoE support capability: End IP device must be IEEE 802.3af/at compliant C13CORD-B Power Cord, 3-pin, Operating temperature: -40C to 70C (-40F to 158F) 10A, 2m, IEC320-C13 to GB2099 (Americas) Mean time before failure: 20+ years POWER-60W Power Supply 60W (MTBF) C14M AC-55VDC Humidity: 10% to 95% (non-condensing) at 35C 1.1A P2.1X5.5MM Cable requirements: Required: 24 AWG 2-pair Category 5e POWER-110W Power Supply 110W Recommended: 23 AWG 4-pair Category 6 C14M AC-55VDC 2.0A P2.1X5.5MM Supported data rate: 10/100Mbps full duplex POWER-190W Power Supply 190W Optional Power Supply: The PoE Extenders will accept an optional power supply with an output of C14M AC-55VDC 55 VDC, 2 amperes (37 to 56 VDC required, 48 to 55 VDC recommended). 3.5A P2.1X5.5MM *For lengths 1 to 20 feet (increments of one foot) and 25, 30, PoE length and guidelines, see tables located on page 2 of specification sheet 35, 40 feet, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), GR (Green), RD (Red), YL (Yellow), OR (Orange) or VL (Violet) before the Y at the end of the part number. For example, the part number www.panduit.com for a blue 15-foot patch cord is UTPSP15BUYPoE Extenders key features and benefits Low cost of installation Significant cost savings compared to fiber cable and media convertors option or other options in the market 4-port option Can power and provide data to up to 4 IP devices in one cable run. Perfect for entry way applications to power cameras, access card readers and VoIP phones. Compatibility with These extenders fit very easily into an existing infrastructure and help extend PoE over the standard 100m range existing PoE or non-PoE switches Uses standard twisted Does not require the usage of specialized cables such as hybrid copper/fiber cables 4-pair cable RJ45 interface Utilizes standard RJ45 interfaces which makes it easy for field terminations of copper cable being used to transmit PoE Individually serialized Marked with quality control number for future traceability Doubles as PoE injectors Optional external power supply option helps to inject power into the channel when non-PoE switch is being used Small profile Small size makes it fit into smaller spaces like a base of a light pole applications PoE extenders are best suited for providing power and 100Mbps data to IEEE 802.3af/at compliant devices such as cameras, VoIP phones, access card readers, PoE lights and others, at a distance beyond the standard 100m channel. IP Endpoint IP Endpoint IP Endpoint IP Endpoint IP Endpoint additional specifications EMC Emission (Class A for POEXRX4 and Class B for POEXRX1 and POEXTX1) EN 55032:2012, FCC Part 15, EN 5021- 4:2015 (POEXRX4, POEXRX1, and POEXTX1) Immunity: EN 55024:2010, EN 50121-4:2015 (POEXRX4, POEXRX1, and POEXTX1) Safety CSA C22.2 No. 60950-1-07 2nd Ed 2014-10 IEC 60950-1:2005 + A1 + A2, EN 60950-1:2006 + A11 + A12 + A1 + A2 terms used 2-pair: In a PoE system, power is provided on only 2 of the Ethernet pairs of wires. Standards based systems use Mode A or Mode B, but not both. 4-pair: In a PoE system, power is provided on all 4 of the Ethernet pairs of wires. Standards based systems will provide both Mode A and Mode B power delivery. Power loss in a 4-pair PoE system is usually half that in a 2-pair PoE system. Class: In a PoE system, powered devices (PDs) are specified by class, based on the power they consume, their under-voltage lockout (UVLO) and whether they are 2-pair or 4-pair devices. Mode A: In a PoE 2-pair system, power is supplied on Ethernet connector pins 12 and 36. Mode B: In a PoE 2-pair system, power is supplied on Ethernet connector pins 45 and 78. Powered Device: In a PoE system, these devices draw power from the source, or PSE. Currently, there are up to eight classes of (PD) powered devices enumerated in the PoE standards. Power Sourcing In a PoE system, this device transmits power to the system. Currently, there are four types of PSE enumerated in the Equipment: (PSE) PoE standards. Under-Voltage In power systems, this is the voltage threshold below which a device no longer operates. Most PoE systems have UVLO Lock Out: (UVLO) of about 30 volts. If the PoE voltage drops below 30V, the power devices (PDs) may stop operating. www.panduit.com