QPPDCBAW14 Panduit

2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES: 1. HARNESS IS AVAILABLE IN PLUG PACK/PLUG, AND PLUG/PLUG CONFIGURATIONS. SEE CHART ON SHEET 2 FOR PRODUCT OPTIONS TABLE 1 2. PATCH CORDS ARE BUNDLED USING HLS VELCRO STRAPS AT 12 (305mm) SPACING. CUSTOMER 3. EACH PATCH CORD IS SEQUENTIALLY NUMBERED PLUG PACK DRAWING AT BOTH ENDS WITH PORT ID LABELS. 4. PATCH CORD ID LABELS CONTAIN PATCH CORD 6-POSITION 02802-19 PERFORMANCE, PART , LENGTH(L), AND QC . 5. PLUG PACK ID LABELS AND PLFIMA MARKER TIES 8-POSITION 02802-25 ARE INCLUDED FOR CUSTOMER APPLIED SWITCH AND PORT IDENTIFICATION. 12-POSITION 02802-26 FOR PRINTABLE LABEL OPTIONS, REFER TO PANDUIT C125X030FJJ, C125X030YPT AND RECESSED 03073-06 B B C125X030FJC. 6. PATCH CORDS ARE 100% PERFORMANCE TESTED 7. SEE CATALOG FOR OPTIONAL REMOVAL TOOL (QPPRT) AND LOCK-IN DEVICE (QPPLD*) LENGTH (L) +1 /-2 (+25mm/-51mm) 3.194 PATCH CORD I.D. LABELS SEE NOTE 4 81.14 PORT I.D. LABELS .653 SEE NOTE 3 PORT I.D. LABELS 16.59 SEE NOTE 3 PLUG PACK I.D. LABELS AND MARKER TIE PLUG PACK END SEE NOTE 5 PLUG END PART NUMBER PRODUCT SPEC/PKG SPEC 6-CABLE ASSEMBLY QPP******* N/A PLUG PACK TO I.I. NUMBER WORK INSTRUCTION PLUG SHOWN N/A N/A TITLE QUICKNET SWITCH PATCHING HARNESS A A CUSTOMER DRAWING ITEM REVISION NAME M02802EH/01 DATASET FILE NAME M02802EH DC31/01E MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN mm .X .XXX .1 2.54 .005 .127 D. CHANGED DRAWING TITLE E. UPDATED MATRIX ON SH2 .XX ANGLES .01 .25 5 3 12-18-13 BJN WFMI TMBA A. UPDATED NOTE 1. UPDATED NOTE 4 C. UPDATED NOTE 5 02802-31 DRAWING NUMBER: THIRD ANGLE REVISED & REDRAWN PREVIOUS REVS REVD FOR CLARITY PROJECTION 02802-31 DRAWN BY DATE CHK SCALE SIZE REV DATE BY CHK APR DESCRIPTION ECN MDJr 10-25-07 WFMI NONE SHT 1 OF 2 A 2 1 D10100DA/142 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. QUICKNET SWITCH PATCHING ASSEMBLY MATRIX QUICKNET SWITCH PLUG PACK PATCH CORD ASSEMBLY PERFORMANCE LEVEL FLAME/SMOKE RATING CABLE COLOR PLUG PACK COLOR CONFIGURATION HARNESS TYPE LENGTH IN FT/M B B A - CAT 6A (10Gig) UTP C - CM A - 6 PACK B - BLUE QPP B - BLUE 03=3 FEET QUICKNET PLUG TO L - LOW SMOKE ZERO 05=5 FEET PLUG HARNESS C - CAT 6 UTP B - 12 PACK W - WHITE W - WHITE HALOGEN (LSZH) D - DUAL RATING G - INTERNATIONAL 07=7 FEET D - 8 PACK R - RED D - CAT 5e UTP GRAY (FOR STP (MEETS BOTH CM 10=10 FEET R - RECESSED 6 PACK AND LSZH) ONLY) E - CAT 6A (10Gig)/ P - TWO SIX PACKS ON 14=14 FEET L - BLACK N - GREEN CABLE CAT 6 STP 12 CABLE HARNESS S - CAT 6 SD UTP S - TWO RECESSED S - SILVER 1M=1 METER R - RED (28AWG) SIX PACKS ON (RECESSED ONLY) T - CAT 5e SD UTP 12 CABLE HARNESS 2M=2 METERS Y - YELLOW X - NO PLUG PACK (28AWG) 6 - 6 CABLES (IF NO X - CAT 6A UTP PLUG PACK) 3M=3 METERS O - ORANGE MATRIX SD 8 - 8 CABLES (IF NO PLUG PACK) Z - CAT 6A UTP MATRIX V - VIOLET 4M=4 METERS W - 12 CABLES (IF NO PLUG PACK) L - BLACK 5M=5 METERS A - GRAY (FOR = FEET UTP SD ONLY) M= METERS PART NUMBER PRODUCT SPEC/PKG SPEC QPP******* N/A I.I. NUMBER WORK INSTRUCTION N/A N/A TITLE QUICKNET SWITCH PATCHING HARNESS A A CUSTOMER DRAWING ITEM REVISION NAME M02802EH/01 DATASET FILE NAME M02802EH DC31/01E MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN mm .X .XXX .1 2.54 .005 .127 .XX ANGLES .01 .25 5 DRAWING NUMBER: THIRD ANGLE 3 12-18-13 BJN WFMI TMBA SEE SHEET 1 FOR REVISION HISTORY 02802-31 PROJECTION 02802-31 DRAWN BY DATE CHK SCALE SIZE REV DATE BY CHK APR DESCRIPTION ECN MDJr 10-25-07 WFMI NONE SHT 2 OF 2 A 2 1 D10100DA/14