RASM3-7-6ZI PEM

PEM RANGLE fasteners provide strong right angle attachment points in thin sheets. RA RIGHT ANGLE FASTENERSRIGHT ANGLE FASTENERS PEM RANGLE fasteners provide strong right angle attachment points in sheet metal or PC Boards. RAA and RAS fasteners for metal are simply pressed into a rectangular mounting hole of the proper size. SMTRA fasteners are installed onto PC Boards using standard surface mount techniques. The holding power of the fastener is unaffected by the repeated tightening and loosening of the screw. PEM RANGLE fasteners are cost-effective replacements for: Bent edge tabs Bent center tabs Bent flanges Angle brackets Tack welds Loose hardware PEM RANGLE fasteners provide many advantages over bent tabs and flanges, including: More predictable designs Material savings Tighter design control Improved shielding characteristics Reduction of loose hardware Fewer assembly steps Unmarred panel surfaces SMTRA right angle threaded RAS fasteners for sheet metal is a fasteners are installed on to PC threaded right angle fastener that Boards using standard surface mount accepts standard unified or metric techniques. They accept standard screws - PAGE 3 unified or metric screws - PAGE 5 Material and finish specifications - PAGE 6 RAA right angle fasteners for sheet metal can accept thread forming or Installation - PAGES 6 - 7 self-tapping screws - PAGE 4 Performance data - PAGES 7 - 8 RANGLE edge Angle mounting brackets RANGLE panel support Bent flanges Reverse side remains flush Depending on placement of the with RANGLE fastener within the mounting hole, a fastener slight gap may be noticeable along RANGLE center Tab the non-clinching edges of the mounting cutouts fastener after installation. If gap is not acceptable in your application, check with techsupport for a solution. RA-2 PennEngineering www.pemnet.com 2018 PennEngineering.