WWW.PHIHONG.COM 40W Dimmable Constant Current LED Driver PDA040W Waterproof LED Driver with 0-10V Dimming Features Class 2 Output per UL1310 IP67 Rated OVP, OCP, Over-Load and Short-Circuit 0.9 Power Factor Correction & Protection & Brownout Protection THD <20% Applications Down lights Architectural lighting Area Lights Safety Approvals cUL/UL 8750 CE Class 2 Output per UL1310 IEC/EN61347-1, IEC/EN61347-2-13 Mechanical Characteristics Length: 162.5mm (6.39in) Height: 32mm (1.26in) Width: 43mm (1.69in) Weight: 342g (12.1oz) Output Specifications DC Output Voltage Output Output Model Current Power Min. Typ. Max. PDA040W-700B 37.8V - 54V 700mA 38W PDA040W-1A0B 26.6V - 38V 1050mA 40W PDA040W-1A4B 18.2V - 26V 1400mA 37W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 1/19/2015 WWW.PHIHONG.COM PDA040W Characteristics INPUT: EMC FCC 47 Part 15 Class B, EN55015 Class B AC Input Voltage Rating 100VAC to 277VAC AC Input Frequency Immunity 47~63Hz IEC61000-4-2 IEC61000-4-4 IEC61000-4-5 Maximum Input Current IEC61000-4-11 0.8A Dielectric Withstand (Hi-pot) Test Leakage Current Primary to secondary: 3000VAC for 1 minute, 10mA 0.25mA maximum Insulation Resistance Power Factor Primary to secondary: >10M Ohm 500VDC, 1 Minute 0.9 FEATURES: THD Short-Circuit Protection < 20% The PSU will withstand a short circuit across the outputs without damage OUTPUT: Output Current Ripple Input Over Current Protection <40% The input power line will be fused with a 2A/300V fuse Efficiency Output Over-voltage Protection Model Typical Efficiency Auto shutdown PDA040W-700B 89% Input / Output Connections PDA040W-1A0B 88% Terminal PDA040W-1A4B 88% Position Specification Length Color Black AWG16 Solid Wire 350mm Auxiliary Power Supply Input White AWG16 Solid Wire 350mm 12V semi regulated (11-14Vdc) Red AWG18 Solid Wire 350mm 0-10mA Output Blue AWG18 Solid Wire 350mm Dim+ Purple AWG20 Solid Wire 350mm Voltage Dimming Function: Dim- Grey AWG20 Solid Wire 350mm 0-10VDC Resistive Dimming* Warranty Resistor must be placed between Dim+ and Dim- for operation. See following page for dimming table. 5 Years Environmental: Temperature Operation case +75C Non-operation -40 to +80C Operating Humidity 20 to 95% *Output derates from 50C to 62C Ta