WWW.PHIHONG.COM 30W Single Port Power over Ethernet Midspan IEEE802.3AT Compliant Power Injector Features Compliant with IEEE802.3at Standard Limited Power Source Non-vented Case Gigabit Compatible Full Protection OVP, OCP May power Cisco AP1250 with ACCY125X dongle 1 year warranty Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals cUL/UL CE Mechanical Characteristics Length: 140mm (5.51in.) Height: 36mm (1.42in.) Width: 65mm (2.55in.) Weight: 0.2Kg (7.58oz) Output Specifications DC Output Load Regulation Model AC Input Voltage Min. Max. Line Load POE29U-1AT-R Three Wire 56V 10mA 535mA 54-57V Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/29/2019 POE29U-1AT Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input Voltage Rating ESD: IEC61000-4-2 , Level 3 100 to 240VAC RS: IEC61000-4-3, Level 3 EFT/Burst: IEC61000-4-4, Level 2 AC Input Voltage Range Surge: IEC61000-4-5, Level 3 90 to 264VAC CS: IEC61000-4-6 , Level 3 Voltage Dips: IEC61000-4-11 AC Input Current Harmonic: IEC61000-3-2, Class A 0.8A (RMS) maximum at 120VAC 0.55A (RMS) maximum at 240VAC Isolation (HI-POT) Primary to secondary: 4242 VDC for 1 AC Input Frequency minute, 10mA 47 to 63Hz Insulation Resistance Leakage Current Primary to secondary: 10M Ohm 500VDC 350uA max FEATURES: Max In-rush Current Over Voltage/Current, Short Circuit 60A max at 240VAC and maxload (Cold Protection Start at ambient 25C) The output is equipped with short-circuit protection and overload protection as per the OUTPUT: IEEE 802.3at specification and conforms to Output Power UL60950-2. The output can be shorted 30W permanently without damage. Hold up Time Indicator 10mSec min at max load at 120VAC, 60Hz Solid Green: unit has detected a IEEE802.3at or af load/PD Efficiency Blinking Green: Power ON ready for 80% Typical at max load at 120VAC, 60Hz connection Fast Blinking Amber/Green: Invalid load ENVIRONMENTAL: connected Temperature Slow Blinking Amber/Green: fault Operating 0C to +40C Non-operating -20C to +70C AC Input Connector Relative Humidity 5 to 90% IEC320 C14 - three wire EMI Output Connection Complies with FCC Class B +pins 3,6 / -pins 1,2 Complies with EN55032 Class B Data IN/POE OUT Connector RJ45 Revision 5/29/2019