WWW.PHIHONG.COM 45W DC-DC Power over Ethernet Splitter Gigabit Speed with Phihong BT or 12.5K Detection Features Designed to work with Diagnostic LEDs POE60 and POE90 injectors Full Protection OCP, OVP Non-Vented Case 12.5K Detection PSE Only Gigabit Compatible 1 Year Warranty Applications WiMax Access Points Computer Workstations Last Mile Wireless Multi Radio Access Points Safety Approvals CE Mechanical Characteristics Length: 140mm (5.51in) Height: 36mm (1.42in) Width: 65mm (2.56in) Weight: 200g (7.05oz) Output Specifications Model DC Output Voltage Load POE45-120-R 12V 3.75A Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/19/2021 POE45 Characteristics WWW.PHIHONG.COM INPUT: Immunity Input Voltage Range ESD: EN61000-4-2 Level 3 47-57V DC RS: EN61000-4-3 Level 2 Note: RS and CS tested with POE60U Input Current EMC 1.3A (RMS) maximum EN55022 Class A FCC Part 15, Class A OUTPUT: Regulation Dielectric Withstand (HI-POT) Test Line and Load 2% Primary to secondary: 2121V DC for 1 minute, 10mA Ripple 120mV maximum at 25C FEATURES: Indicators Efficiency LED 1 Output ON 83% minimum at full load and 48V DC LED 2 Power received via Data LED 3 Power received via Spare Pair O/P Voltage Protection In case of output voltage overload, output Insulation Resistance will shutdown, and then auto restart Primary to secondary: >10M Ohm 500V DC Output can be shorted permanently without damage Input and Output Data Connector RJ45 ENVIRONMENTAL: Temperature Output Connector Operation 0 to +40C Center Positive Barrel 12mm x 2.1mm x Non-operation -20 to +65C 5.5mmTip is user changeable for other sizes Humidity 5 to 90%