WWW.PHIHONG.COM 60W 3-in-1 Single Port Media Converter IEEE802.3bt Compliant Power Injector Features Compliant with IEEE802.3bt/at/af 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Standard Non-Vented Case 60W POE Power Limited Power Source Extends Ethernet to 200 Meters with Full Protection OVP, OCP copper, (can be even more with Fiber) Single Source 4 Pair Power Current Standard SFP Module Input Sharing Converts SFP to POE (converts fiber 1 Year Warranty to copper) Gigabit Compatible Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals cUL/UL 60950-1 & 62368-1 CE Mechanical Characteristics Length: 160mm (6.30in.) Height: 50mm (1.97in.) Width: 180mm (7.09in.) Weight: 1.7Kg (3.75lbs) Output Specifications 1 DC Output Load Regulation Model AC Input 2 Voltage Min. Max. Line Load +56VDC +1V/-2V POE60S-1BT-R IEC320(C14) 56V <20mA 1.07A (54-57VDC) Notes: 1. Voltage measured within 2 of the output RJ45 connector on data pairs 3,6(+) and 1,2(-) at 25C 2. Combined output on data pairs and spare pairs. Otherwise 535mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-) Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 8/11/2021 POE60S-1BT-R Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range Immunity 90VAC to 264VAC ESD: IEC61000-4-2. Level 3 RS: IEC61000-4-3. Level 3 AC Input Voltage Rating EFT: IEC61000-4-4. Level 3 100 to 240VAC Surge: IEC61000-4-5. Level 3 CS: IEC61000-4-6. Level 3 AC Input Current PFMF: IEC61000-4-8 Level 5 2.0A (RMS) max for 90VAC Voltage Dips IEC61000-4-11 1.0A (RMS) max for 240VAC Harmonic: IEC61000-3-2 Class A Leakage Current Insulation Resistance 3.5mA max 254VAC/50Hz Pri. to Sec.: >10M OHM 500VDC Pri. to F.G.: >10M OHM 500VDC AC Inrush Current 40A (RMS) max for 115VAC Dielectric withstand(HI-POT) test 80A (RMS) max for 230VAC Pri. to Sec.: 4242VDC for 1min 10mA Pri. to F.G.: 2121VDC for 1min, 10mA OUTPUT: Total Output Power FEATURES: 60W 40C Over Current Protection 1350mA max Output Ripple 500mV max 25C Over Voltage Protection 120VDC max Efficiency 75% (typical) at max load LED Indicators Led 1 Hold-up Time Blinking GREEN Unit is ON Active with 16mS min. 120VAC/60Hz max load No Load Solid GREEN Unit has detected a Valid ENVIRONMENTAL: IEEE802.3at/IEEE802.3af Load/IEE802.3bt Temperature Solid RED Unit is in Over Load Condition Operation -10C to +45C 60W or Unit has detected an Invalid Load +45C to +55C 30W Led 2 Humidity 5 to 90% Solid GREEN = AC Power Good EMI Input Connector FCC Part 15 Class A IEC320 inlet 3 pin(C14) EN55032/22 Class A EN50121-4 Output Connection IEC 62236-4 +pins 3,6,4,5 / -pins 1,2,7,8 Revision 8/11/2021