POLAM-ELTA Sp. z o.o. Jerozolimskie Avenue 202 LED DIODES 02-486 Warsaw, POLAND LED CONTROL LAMPS tel. (+48) 22-837-22-07 ww w.pol am elta.com fax (+48) 22-207-24-28 e-mail: polamelta polamelta.com.pl COMPLIANCE DECLARATION NR 1/07/2018 Producer: POLAM-ELTA Sp. z o.o. KRS Nr: 0000190790 Jerozolimskie Avenue 202 REGON: 001416903 02-486 Warsaw We declare with a full responsibility that LED signal lamps 5 we manufacture: LB , LG , LO , LR , LY , LW , LRG , LRY , LGY , LRGB , LRGY (parameters in accordance with catalogue data) comply requirements imposed by: 1. Low Voltage Directive LVD 2014/35/UE 2. The standard norms (relating to the particular parts of a product): - PN EN 612 36:2002 Works under voltage bipolar indexes Nn - PN-E-90500-1:2001 Wires of polyvinyl chloride insulation 450/750 - PN-80/E-85050 miniature light bulbs of general use - PN-EN 983:2000 miniature light bulbs The year of obtaining CE sign: 07 Warszawa 09-07-2018 Place and date of issue 1. Product description: The declaration is concerned about LED signal lamps produced for a number of voltage ranging 24V-AC - 400VAC (24V 30V 48V 60V 110-130V 230V 400V) and 24V-DC 220V-DC (24V 30V 48V 60V 110-130V 220V). The lamps are designed for electric accessories use. 2. Technological documentation: All the signal LED lamps are based on the following circuitry Half-wave rectifier The elements of casings are made from ABS material. Electric connections are made on glass-epoxy laminate of 1 mm ply. The main wire LGY0,5 is of 0,5 mm2 section 450V / 750 V or connectors j 2.8. Tightness level lamp: IP40. Ambient temperature: -40C to +70C. For 230 V-AC voltage, power consumption is 0,8 W, for 24V-AC, it is 0,25 W and for 24V-DC, it is 0,5 W. - signal lamp