Model 6411 Back Probe Pin FEATURES: Make connections to terminals inside connectors up to 1 (24,39mm) deep. Pin can be bent to fit into tight spaces Banana Jack fits modular test leads, such as Pomona models 5907A, 5908A and 5909A Bright yellow color is easy to find in poor light MATERIALS: Jack: Brass Tip Insulation: Polypropylene, Yellow Tip: Nickel Plated Beryllium Copper Boot Insulation: Vinyl, Yellow RATINGS: For CE compliance: not intended for hand-held use at voltages above 33Vrms / 70Vdc. Current: 3 Amperes Max. ORDERING INFORMATION: Model 6411 (10 per package) All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport pomonatest.com) For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 Page 1 of 2 D1094958 Model 6411 Back Probe Pin All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport pomonatest.com) For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 Page 2 of 2 D1094958