1518A BLK

Travel Adaptors European Travel Adaptor Australia Travel Adaptor Unites States Travel Adaptor Specifications Standard : BS 5733 Base and Cover : FRPP Socket Terminals (bus bar) : Brass Plug Pin : Brass Screw : Steel Zinc Plated Shutter : Nylon (PA) Ratings : 10A 250V AC Conditions of use An ambient temperature in the range of -5C to +40C, with the average value over the course of 14 hours not exceeding 25C. A situation not subject to exposure to direct radiation from the sun or other sources of heat likely to raise temperatures above the limits species in the above point. An altitude not exceeding 2000m above sea level. An atmosphere where the product is not subject to abnormal pollution by smoke, chemical fumes, rain, spray , prolonged periods of high humidity or other abnormal conditions. Safety Specifications No Item Conditions Requirements No defect such as cracks, deep scratches or 1 Appearance blemishes 2 Marking Shall be legible and clear 3 Insulation resistance 500 + 250V DC 1 min Shall not be less than 5 4 Dielectric strength 2000 60V 1 min No damage or breakdown 5 Resistance to aging 70 5 168hrs No cracks or become sticky 6 Construction 20 -5 Complied with figure 11, 12, 14 and 16 gauge Terminal, cord grip and cover screws shall 7 Torque test Value of 0.6Nm (6.1kgf/cm) withstand the torque applied 8 Glow wire test 650/750 electrically heated Flame must extinguish within 30 seconds Temperature rise must not exceed: 9 Temperature rise 10A 250V Terminals or terminations: 52K Accessible surface: 52K Subjected to 1mm test probe with 10 Live parts accessibility applied force of 5N when they are Live parts of socket shall not be accessible. mounted and wired as in normal use. www.farnell.com www.cpc.co.uk Page <1> 07/03/18 V1.0Travel Adaptors Part Number Table Description Part Number Travel Adaptor, UK to US, White 1518C WHT Travel Adaptor, UK to US, Black 1518C BLK Travel Adaptor, UK to European, White 1518A WHT Travel Adaptor, UK to European, Black 1518A BLK Travel Adaptor, UK to Australia White 1518B WHT Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of the Group. Premier Farnell Limited 2016. www.farnell.com www.cpc.co.uk Page <2> 07/03/18 V1.0