HS118

Heat Shrink Tubing Features: Semi-rigid, adhesive lined, polyolefin tubing 3:1 shrink ratio Splash-resistant, moisture-resistant covering Rugged protection against abrasion, vibration and flexing Excellent strain relief and insulation of weak points Operation temperature range : -55C to 125C Dimension Table: Size As supplied (mm) After Recovered (mm) Total Wall Total Wall Adhesive Inch mm I.D. O.D. I.D. O.D. Thickness Thickness Thickness 1/8 3.2 3.6 0.4 0.3 0.15 4.2 0.7 1 +0/-0.2 0.9 0.3 0.4 0.2 2.8 +0.6/-0.8 3/16 4.8 5.2 0.4 0.35 0.15 5.9 0.7 1.6 +0/-0.3 1.05 0.3 0.4 0.2 3.7 +0.6/-0.9 1/4 6.4 7 0.5 0.4 0.2 7.8 0.9 2.2 +0/-0.3 1.25 0.3 0.45 0.2 4.7 +0.6/-0.9 5/16 7.9 8.5 0.5 0.45 0.2 9.4 0.9 2.7 +0/-0.4 1.35 0.3 0.45 0.2 5.4 +0.6/-1 3/8 9.5 10 0.5 0.45 0.2 10.9 0.9 3.2 +0/-0.4 1.45 0.3 0.5 0.2 6.1 +0.6/-1 1/2 12.7 13.2 0.5 0.5 0.25 14.2 1 4.2 +0/-0.4 1.65 0.3 0.5 0.2 7.5 +0.6/-1 5/8 15 15.5 0.5 0.55 0.25 16.6 1 5.2 +0/-0.4 1.8 0.3 0.55 0.3 8.8 +0.6/-1 3/4 19.1 19.8 0.7 0.6 0.25 21 1.2 6.3 +0/-0.5 1.95 0.3 0.6 0.3 10.2 +0.6/-1.1 Dimensions : Millimetres Product Properties: Property (Units) Test Method Requirement Physical Tensile Strength (psi) ASTM D638 1,500 min. Elongation (%) ASTM D638 300 min. Cold Impact (-55C) ASTM D746 no cracking Heat Shock (250C, 4 hrs) AMS-DTL-23053 no cracking Secant Modulus (psi) ASTM D882 25,000 max. Longitudinal Change (%) AMS-DTL-23053 5 Electrical Dielectric Strength (Volts / mm) ASTM D876 1,500 min. 14 Volume Resistivity (-cm) ASTM D876 1 10 Chemical Corrosion UL224 no corrosion Water Absorption (%) ASTM D570 2 max. Fluid Resistance (23C, 24 hrs) - Good Flammability UL224 Pass www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 14/11/14 V1.1Heat Shrink Tubing Part Number Table Description Part Number Heat Shrink Tubing, 3:1, 1/8 , 3.2mm, BLK, 10m HS114 Heat Shrink Tubing, 3:1, 3/16 ,4.8mm, BLK, 10m HS115 Heat Shrink Tubing, 3:1, 1/4 ,6.4mm, BLK, 10m HS116 Heat Shrink Tubing, 3:1, 5/16 ,7.9mm, BLK, 10m HS117 Heat Shrink Tubing, 3:1, 3/8 , 9.5mm, BLK, 10m HS118 Heat Shrink Tubing, 3:1, 1/2 ,12.7mm, BLK, 10m HS119 Heat Shrink Tubing, 3:1, 5/8 ,15mm, BLK, 10m HS120 Heat Shrink Tubing, 3:1, 3/4 ,19.1mm, BLK, 10m HS121 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 14/11/14 V1.1