Thin Wall Tubing 175C, Clear, Semi-Rigid, High Temperature, Chemical Resistant, PVDF, Heat Shrink Description Semi-rigid flame-retardant heat shrinkable Polyvinylidene fluoride (PVDF) tubing for applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects wires, solder joints, terminals, connectors and components from most industrial fluids, solvents and chemicals. Specifications Operating temperature : -55C to +175C Minimum Full Recovery Temperature : 175C Shrink Ratio : 2:1 Colour : Clear Technical Data Property Test Method Typical Data Tensile Strength ASTM D2671 30Mpa Ultimate Elongation ASTM D2671 550% Elongation after Heat Aging 168hrs, 250C 500% Flammability UL 224 VW-1 Pass Heat Shock 300C, 1hr No cracking Cold Bend -55C, 1hr No Cracking Dielectric Strength ASTM D2671 30kV/mm 14 Volume Resistivity ASTM D 876 1x10 Cm Product Dimensions Size As supplied After Recovery(mm) Part Number Internal Diameter Internal Diameter Wall Thickness Inch mm (mm) (mm) (mm) PP001990 1/16 1.6 1.6 0.8 0.25 0.05 PP001993 3/32 2.4 2.4 1.2 0.25 0.05 PP001994 1/8 3.2 3.2 1.6 0.25 0.05 PP001995 3/16 4.8 4.8 2.4 0.25 0.05 PP001996 1/4 6.4 6.4 3.2 0.3 0.05 PP001997 3/8 9.5 9.5 4.8 0.3 0.05 PP001991 1/2 12.7 12.7 6.4 0.3 0.05 PP001992 3/4 19.1 19.1 9.5 0.42 0.05 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 02/04/18 V1.0Thin Wall Tubing 175C, Clear, Semi-Rigid, High Temperature, Chemical Resistant, PVDF, Heat Shrink Part Number Table Description Part Number Tubing, High Temp, Chemical Resistant, PVDF, 1.6mm, Clear, 1.2m PP001990 Tubing, High Temp, Chemical Resistant, PVDF, 12.7mm, Clear, 1.2m PP001991 Tubing, High Temp, Chemical Resistant, PVDF, 19.1mm, Clear, 1.2m PP001992 Tubing, High Temp, Chemical Resistant, PVDF, 2.4mm, Clear, 1.2m PP001993 Tubing, High Temp, Chemical Resistant, PVDF, 3.2mm, Clear, 1.2m PP001994 Tubing, High Temp, Chemical Resistant, PVDF, 4.8mm, Clear, 1.2m PP001995 Tubing, High Temp, Chemical Resistant, PVDF, 6.4mm, Clear, 1.2m PP001996 Tubing, High Temp, Chemical Resistant, PVDF, 9.5mm, Clear, 1.2m PP001997 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 02/04/18 V1.0