SPTW24

Heat Shrink Tubes Ultra Thin Wall Features: SPTW Series 2:1 Rapid shrink at 100C For use where space is limited Applications include termination on multipole and D connectors Highly flexible, flame-retarded polyolefin Colour : Black Specifications Property Test Method Value Physical 2 10.5 Tensile N / mm Minimum Elongation % Minimum ASTM D638 200 Specific Gravity Maximum 1.2 Low Temperature Flex (-55C) MIL-1-23053 Pass Heat Shock (158C / 168 hours) Longitudinal Change % Maximum ASTM D2671 10 Colour Stability - Pass Electrical Dielectric Strength V / mm Minimum ASTM D876 25 KV Operating Temperature Range C - -55 to +125 Chemical Corrosion of Copper ASTM D2671 No pitting or blackening of copper Copper Stability (158C / 168 hours) Pass Flammability OFT Self extinguishing Specification Table Nominal Minimum Maximum Nominal Standard Reel Part Number Diameter Expansion Recovered Recovered Wall Length (m) 1.2 (3/64) 1.2 (0.046) 0.6 (0.023) SPTW12 1.6 (1/16) 1.6 (0.063) 0.8 (0.031) SPTW16 0.18 (0.007) 2.4 (3/32) 2.4 (0.093) 1.2 (0.046) SPTW24 1.2 3.2 (1/8) 3.2 (0.125) 1.6 (0.062) SPTW32 4.8 (3/16) 4.8 (0.187) 2.4 (0.093) SPTW48 0.25 (0.01) 6.4 (1/4) 6.4 (0.25) 3.2 (0.125) SPTW64 Dimensions : Millimetres (Inches) (Unless Specified) Important Notice : This data sheet and its contents (theInformatio) belong to the members of the Premier Farnell group of companies (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 12/05/12 V1.1X-ON Electronics Authorized Distributor Click to view similar products for Wire Identification category. Click to view products by Pro Power manufacturer. Other Similar products are found below : 7201403 H200X044H2T H200X034F1T H100X084F2T H100X044F13 H100X025H1T2 H100X025F1TB 11631010 PPM15 PMDR4049 D10273000 RT250R9X2 RO2011401WH SPC35207 SPC35245 TY25M2 LHS124TW0 TEXTIEMYELLOW H100X084H2T2 H100X084H1T H100X084F1T H100X064H3T H100X064H1T H100X044H3T H100X034H4T