EK42359-01

Product Specification PE42359 SPDT UltraCMOS RF Switch 10 MHz 3 GHz Product Description Features The PE42359 UltraCMOS RF switch is designed to cover a broad range of applications from 10 MHz through AEC-Q100 Grade 2 certified 3 GHz. This reflective switch integrates on-board CMOS Supports operating temperature up to control logic with a low voltage CMOS-compatible control +105C interface, and can be controlled using either single-pin or Single-pin or complementary CMOS complementary control inputs. Using a nominal +3-volt logic control inputs power supply voltage, a typical input 1 dB compression Low insertion loss point of +33.5 dBm can be achieved. PE42359 also 0.35 dB 1000 MHz meets the quality and performance standards for 0.50 dB 2000 MHz automotive applications and has received AEC-Q100 Grade 2 certification. Isolation of 30 dB 1000 MHz High ESD tolerance of 2kV HBM The PE42359 is manufactured on Peregrines Typical input 1 dB compression point of UltraCMOS process, a patented variation of silicon-on- +33.5 dBm insulator (SOI) technology on a sapphire substrate, 1.8V minimum power supply voltage offering the performance of GaAs with the economy and integration of conventional CMOS. Small SC-70 package Figure 1. Functional Diagram Figure 2. Package Type 6leadSC70 RFC RF1 RF2 ESD ESD CMOS Control Driver CTRL CTRL or V DD DOC-02109 Document No. DOC-13214-3 www.psemi.com 2012-2013 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 14 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: PE42359 Product Specification Table 1. Electrical Specifications +25C, V = 3.0V (Z = Z = 50 ) DD S L Parameter Conditions Minimum Typical Maximum Units 1 Operation Frequency 10 3000 MHz 10-1000 MHz 0.35 0.45 dB 2 Insertion Loss 1000-2000 MHz 0.50 0.60 dB 2 2000-3000 MHz 1.1 1.3 dB 10-1000 MHz 32 35 dB Isolation - RFX to RFX 1000-2000 MHz 20 21 dB 2000-3000 MHz 13 14 dB 10-1000 MHz 28 29 dB Isolation - RFC to RFX 1000-2000 MHz 19 20 dB 2000-3000 MHz 12 13 dB 10-1000 MHz 21 25 dB 2 Return Loss - RFX to RFC 1000-2000 MHz 15 18 dB 2 2000-3000 MHz 9 11 dB Switching Time 50% CTRL to 90% or 10% RF 2 us 3 Video Feedthrough 15 mV pp 1000 MHz 2.3 - 3.3V 31.5 33.5 1000 MHz 1.8 - 2.3V 29.5 30.5 Input 1 dB Compression dBm 2500 MHz 2.3 - 3.3V 28.5 30.5 2500 MHz 1.8 - 2.3V 28 29 Input IP3 2500 MHz, 20 dBm input power 55 dBm Notes: 1. Device linearity will begin to degrade below 10 MHz 2. High frequency performance can be improved by external matching (see Figure 20 through Figure 25 and Figure 28) 3. The DC transient at the output of any port of the switch when the control voltage is switched from Low to High or High to Low in a 50 test set-up, measured with 1ns risetime pulses and 500 MHz bandwidth Table 1A. Electrical Specifications -40C to +105C, V = 3.0V (Z = Z = 50 ) DD S L Parameter Conditions Minimum Typical Maximum Units Operation Frequency 10 3000 MHz 10-1000 MHz 0.35 0.6 dB Insertion Loss 1000-2000 MHz 0.5 0.75 dB 2000-3000 MHz 1.1 1.4 dB 10-1000 MHz 31 35 dB Isolation - RFX to RFX 1000-2000 MHz 19 21 dB 2000-3000 MHz 12 14 dB 10-1000 MHz 27 29 dB Isolation - RFC to RFX 1000-2000 MHz 18 20 dB 2000-3000 MHz 11 13 dB 10-1000 MHz 20 25 dB Return Loss - RFX to RFC 1000-2000 MHz 14 18 dB 2000-3000 MHz 9 11 dB Switching Time 50% CTRL to 90% or 10% RF 3.6 us Video Feedthrough 15 mV pp 1000 MHz 2.3 - 3.3V 30.5 33.5 1000 MHz 1.8 - 2.3V 28.5 30.5 Input 1 dB Compression dBm 2500 MHz 2.3 - 3.3V 27.5 30.5 2500 MHz 1.8 - 2.3V 27 29 Input IP3 2500 MHz, 20 dBm input power 54 dBm 2012-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-13214-3 UltraCMOS RFIC Solutions Page 2 of 14 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: