4 3 2 1 PT65 series Rotary code switches Through-hole UG1006-A 4 actuator types Save board space Highly reliable Solder and flux sealed, washable PT65 SERIES Actuators Codes Terminals 01 BCD (none) Straight 1 Screwdriver 02 BCD complement L254 Right angle, 3 Spindle 03 Hexadecimal spacing 2,54 (.100) 5 Segment wheel 7 Accessories 06 Hexadecimal complement L508 Right angle, spacing 5,08 (.200) ELECTRICAL SPECIFICATIONS MECHANICAL AND THERMAL SPECS Operating voltage : 24 VDC max. Torque : 0,7 Ncm min. Contact load, static : 400mA max. Expected life : 10.000 cycles min. Contact load, dynamic : 150mA max. Operating temperature : Initial contact resistance : 80 m max. -20C to +70C Insulation resistance : 100 M min. SOLDER RECOMMENDATIONS MATERIALS F (DIN CEI 68-2-20) Base : UL94-V0, high temperature thermoplastic Manual soldering : 340C max.for Cover : UL94-V0, high temperature thermoplastic, grey 2 seconds max. Actuator : PA 4.6 nylon Wave soldering : 260C max. for Contacts : gold over nickel plated phosphor bronze 10 seconds max. Terminals : tin plated DIMENSIONS PACKAGING Screwdriver slot, straight terminals Switches for screwdriver slot or accessory actuation (PT651 and PT657) : tubes of 50 pieces Switches with spindle (PT653) or segment wheel (PT655) : candy trays of 50 pieces 7.62 2.54 (.300) (.100) Accessories : bags of 50 pieces 0.27 0.55 (.011) (.022) 10.00 (.393) 0 18 CC 42 4.00 Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. (.157) APEM www.apem.com F-5 CR65 series, with a blue case, outside the US and the UK. 9 8 10.00 2.20 (.393) (.087) 4.00 6.50 3.20 (.157) (.126) (.256) 0.20 (.008) 7 6 57 7 7 4 4 4 6 6 6 3 3 3 5 5 5 2 2 2 4 4 4 1 1 1 3 3 3 PT65 series Rotary code switches Through-hole ACTUATORS PT65 1 Screwdriver 3 Spindle (grey) 5 Segment wheel (grey) 7 Accessories 1.00 (.039) 4.00 (.157) 0 0 0 0 4.00 1.00 7.70 1.05 (.157) (.041) (.039) (.303) See next page CODES / TRUTH TABLES PT65 01 BCD 02 BCD complement 03 Hexadecimal 06 Hexadecimal complement C 1 2 4 8 C 1 2 4 8 C 1 2 4 8 C 1 2 4 8 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 10 A 10 A 11 B 11 B F Position Marking 12 C 12 C 13 D 13 D 14 E 14 E 15 F 15 F TERMINALS PT65 (none) Straight L254 Right angle L508 Right angle spacing 2,54 (.100) spacing 5,08 (.200) 5.08 2.54 (.200) (.100) 2.54 2.54 2.54 (.100) (.100) (.100) 2.54 2.54 2.54 (.100) (.100) (.100) F-6 www.apem.com APEM 2 2 2 9 9 9 1 1 1 8 8 8 7.62 (.300) 1.00 (.039 DIA) 0 3.20 (.126) 7.62 (.300) 1.00 (.039) 1.00 (.039 DIA) 0 2.85 7.30 (.287) (.112) 2.54 (.100) 2.80 4.40 (.173) (.039) 1.00 3.50 (.039 DIA) (.138) 9.50 0 (.374) 5.08 (.200) 1.05 (.041) 3.20 (.126) 7 7 7 9 9 9 6 6 6 8 8 8 5 5 5