This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2019, PUI Audio Inc. Data Sheet AS02008MR-R Made for modern electronic devices, PUI Audio s AS02008MR-R is designed to be as thin as possible and recreate the human voice with good fidelity. Features: IP65-rated face when properly installed Only 3mm thick 2.4g weight Designed for clear voice response Speaker Specifications Parameters Values Units Rated Input Power 0.5 Watts Max Input Power 0.8 Watts Impedance 8 15% Ohms Sensitivity 0.1W/0.1m (at 0.8, 1.0, 1.2, 1.5 kHz) 86 3 dB Resonant Frequency 500 20% Hz Frequency Range (-10 dB) 350 ~ 20,000 Hz Frame Material Metal - Magnet Material NdFeB - Weight 2.4 Grams Ingress Protection Rating IP65 - Acceptable Soldering Methods Hand Solder for 3 seconds - Shall not be audible with 2Vrms - sine wave from 500 Hz to 4 kHz Buzz, Rattle, etc. Environmental Compliances RoHS - Cone shall move forward when a positive voltage is applied to - Polarity the positive terminal Storage Temperature -30 ~ +70 C Operating Temperature -20 ~ +55 C PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2019, PUI Audio Inc. Measurement Method (Measured with 2V input with speaker mounted on IEC baffle) Typical Frequency Response (2V input measured at 10cm, two samples) PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925