PA4341.821NLT Pulse

SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT Series NEW - AEC-Q200 Qualified Height: 3.0mm Max Footprint: 7.6mm x 6.9mm Max Current Rating: up to 32.5A Inductance Range: 0.1uH to 47.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux Electrical Specifications 25C - Operating Temperature -40C to +125C DC Saturation 5 Resistance Inductance Rated Current 100KHz, 1V Current MAX. TYP. Max. Part Number (uH 20%) A m m A PA4341.101NLT 0.10* 32.5 1.7 1.2 60.0 PA4341.151NLT 0.15* 27.0 1.9 1.5 45.0 PA4341.161NLT 0.16* 27.0 1.9 1.5 45.0 PA4341.201NLT 0.20* 24.0 2.5 1.8 41.0 PA4341.221NLT 0.22 23.0 2.8 2.1 40.0 PA4341.301NLT 0.30 21.0 3.8 3.2 35.0 PA4341.331NLT 0.33 20.0 3.9 3.5 32.0 PA4341.361NLT 0.36 19.0 4.2 3.6 32.0 PA4341.471NLT 0.47 17.5 4.2 4.0 26.0 PA4341.561NLT 0.56 16.5 5.0 4.7 25.5 PA4341.601NLT 0.60 16.0 5.2 4.7 25.5 PA4341.681NLT 0.68 15.5 5.5 4.8 25.0 PA4341.751NLT 0.75 14.5 6.6 5.5 24.5 PA4341.821NLT 0.82 13.0 8.0 6.7 24.0 PA4341.102NLT 1.0 11.0 10.0 8.3 22.0 PA4341.122NLT 1.2 10.0 12.0 10.0 20.0 PA4341.152NLT 1.5 9.0 15.0 13.0 18.0 PA4341.182NLT 1.8 8.5 17.0 14.0 16.0 PA4341.202NLT 2.0 8.2 19.0 16.0 15.0 USA 858 674 8100 Germany 49 2354 777 100 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 1 pulseelectronics.com P768.G (09/16)SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT Series Electrical Specifications 25C - Operating Temperature -40C to +125C DC Saturation 5 Resistance Inductance Rated Current 100KHz, 1V Current MAX. TYP. Max. Part Number (uH 20%) A m m A PA4341.222NLT 2.2 8.0 20.0 18.0 14.0 PA4341.252NLT 2.5 7.0 22.0 20.0 13.0 PA4341.332NLT 3.3 6.0 30.0 28.0 13.5 PA4341.472NLT 4.7 5.5 40.0 37.0 10.0 PA4341.562NLT 5.6 5.0 48.0 43.0 9.0 PA4341.682NLT 6.8 4.5 60.0 54.0 8.0 PA4341.822NLT 8.2 4.0 68.0 64.0 7.5 PA4341.103NLT 10.0 3.5 85.0 75.0 6.0 PA4341.123NLT 12.0 3.3 93.0 81.0 5.5 PA4341.223NLT 22.0 2.0 190.0 165.0 3.5 PA4341.473NLT 47.0 1.75 363.0 302.0 2.0 Notes: 1. Actual temperature of the component during system operation (ambient plus on the system condition. It is suggested that the component be tested at the system temperature rise) must be within the standard operating range. level, to verify the temperature rise of the component during system operation. 2. The saturation current is the current at which the initial inductance drops ap- 4. The part temperature (ambient+temp rise) should not exceed 125C under worst proximately 30% at the stated ambient temperature. This current is determined by case operating conditions. Circuit design, PCB trace size and thickness, airflow and placing the component in the specified ambient environment and applying a short other cooling provisions all affect the part temperature. Part temperature should be duration pulse current (to eliminate self-heating effect) to the component. verified in the end application. 3. The rated current is the DC current required to raise the component temperature by 5. Please note that the inductance tolerance is 20% for all parts except PA4341.101NLT, approximately 40C. Take note that the components performanc varies depending PA4341.151NLT, PA4341.161NLT, and PA4341.201NLT s tolerance is 30%. Mechanical PA4341.XXXNLT Final Layout SUGGESTED PAD LAYOUT 2 pulseelectronics.com P768.G (09/16)