PA5002.102NLT

I A T F SMT Power Inductors High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT POWER PRODUCTS Height: 2.0mm Max Footprint: 5.7mm x 5.5mm Max Current Rating: up to 30Apk Inductance Range: 0.15uH to 1.5uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5002) and Automotive (PM2202) grades Electrical Specifications 25C, Operating Temperature Range -55C to +155C 3 2 Part Number DC Resistance Inductance Rated Saturation K Factor Current Current 100KHz, 0.1V for TYP. MAX. 6 Commerical Automotive Core Loss uH20% A m m A PA5002.151NLT PM2202.151NLT 0.15 18.8 4 4.6 27 458.5 PA5002.161NLT PM2202.161NLT 0.16 18.8 4 4.6 27 - PA5002.331NLT PM2202.331NLT 0.33 14.4 6.1 7 24 291.7 PA5002.471NLT PM2202.471NLT 0.47 14.1 7 8.05 20 213.9 PA5002.561NLT PM2202.561NLT 0.56 13.9 8.7 9.54 16 213.9 PA5002.681NLT PM2202.681NLT 0.68 13.4 8.9 10.2 14 168.9 PA5002.801NLT PM2202.801NLT 0.8 13 10.3 11.8 13.5 168.9 PA5002.821NLT PM2202.821NLT 0.82 12 11 12.7 13 168.9 PA5002.102NLT PM2202.102NLT 1 10.5 12 13.8 12.8 139.5 PA5002.122NLT PM2202.122NLT 1.2 9.4 14.2 16.3 12.2 118.9 PA5002.152NLT PM2202.152NLT 1.5 8.8 16.2 18.7 11.7 118.9 Notes: 1. Actual temperature of the component during system operation (ambient plus other cooling provisions all affect the part temperature. Part temperature should be temperature rise) must be within the standard operating range. verified in the end application. 2. The saturation current is the current at which the initial inductance is guaranteed 5. Parts shown in bold are standard catalog parts and are available through sample to drop by no more than 40%. The typical inductance at a specified current can be stock and distribution. Parts in lighter font are available but are not necessarily held found on the typical performance curves. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40C. Take note that the components performanc varies depending 6. The PM2202.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The on the system condition. It is suggested that the component be tested at the system mechanical dimensions are 100% tested in production but do not necessarily meet a level, to verify the temperature rise of the component during system operation. product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 155C under worst 7. Special Characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and Power.PulseElectronics.com P807. E (07/20) 1 1 6 9 4 90 1 ,27 63(&, &,) / 5 )2 3359 2 PR X& H PR X& 3 1 7/1 3 Y SMT Power Inductors 1 ,27 63(&, &,) / 5 )2 3359 2 X+ 31 6 (,518(&+ 6 % High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT PR X& H / ( 0 ( 0 , 2 PR X& 3 1 7/1 3 Y POWER PRODUCTS X+ 31 6 (,518&(+ 6 % Mechanical / ( 0 ( 0 , 2 PA5002.XXXNLT and PM2202.XXXNLT > yyy D/C FINAL LAYOUT SUGGESTED PAD LAYOUT L 6 % & ( ) * + / Series A B C D E F L G H & + 6 ( , 5 ( 6 UI H U U 4.30.3 2.30.25 4.5 (REF) 2.0 (REF) 4.7 (REF) PA5002/PM2202 5.50.2 5.30.2 1.80.2 1.10.2 L 6 % & ( ) * + / All Dimensions in mm. 3 , 2 71 , , , ) 1 + 6 ( , 5 ( 6 18&+ UI H U U TAPE & REEL INFO % & ( ) Blank portions Chip cavity Blank portions W U 3 L 6 H W , 3 , 2 71 ,, , ) L 6 % HW V L H W , ( H 7 0 7 18&+ & & 7O) F % & ( ) W U 3 L 6 H W , L 6 % HW V L H W , ( H 7 0 7 K && 7O) F P1 200mm or more 400mm or more G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY A G P W K PCS/REEL 1 0 PA5002/PM2202 330 12.4 8 12 2.3 3000 Typical Performance Curves PA5002.151NLT PA5002.161NLT 0.25 70 0.25 70 0.2 56 0.2 56 0.15 42 0.15 42 0.1 28 0.1 28 0.05 14 0.05 14 0 0 0 0 0 7 14 21 28 35 0 7 14 21 28 35 DC CURRENT(A) DC CURRENT(A) Power.PulseElectronics.com P807. E (07/20) 2 INDUCTANCE (uH) W o TEMP. RISE( C) INDUCTANCE (uH) A o TEMP. RISE( C) RGHDL RGH RO HUDQF QGXFDQF SDU EHUQXP HU HV QGXFDQF HU HV RGXF RGHDL RGH RO HUDQF QGXFDQF SDU EHUQXP HU HV 17 (& 8&752 QGXFDQF HU HV RGXF HI HI % &8 17 (& 8&752 HU HV HI HI % 81 HU HV zztt yyyE 16 16 , &+ & 1, DFKHQ 1R 5H VWHU 16 16 , &+ & 1, DW VWHU DFKHQ 1R 5H VWHU DW VWHU