Part Number 880365 1380 MHz BAW Filter Data Sheet Features For GPS L3/4 applications Usable bandwidth of 38 MHz Single-ended operation Ceramic Surface Mount Package Hermetic Package Pin Configuration Surface Mount 3.26 x 1.60 x 0.84 mm Bottom View I/O I/O GND Pin No. Description I/O Input/Output GND Ground Dimensions shown are nominal in millimeters All tolerances are 0.13mm except overall length and width 0.25mm Overall width, length, and thickness are the only critical dimensions. All other dimensions are for reference only. Body: Sapphire Lid: Alumina Terminations: Au plating 0.5 - 2.5m, over a 2.0 6.0 m Ni plating Subject to change or obsolescence without notice Rev B September 2013 Page 1 of 5 Part Number 880365 1380 MHz BAW Filter Data Sheet (1) Electrical Specifications (2) o Operating Temperature Range: -40 to +85 C (3) Parameter Minimum Typical Maximum Unit 10dB Center Frequency 1375 1380 1385 MHz Insertion Loss at Fo - 2.75 4.0 dB (4) 3 dB Bandwidth 38 40 - MHz (4) 40 dB Bandwidth - 115 124 MHz (4) Amplitude Variation 1370 - 1390 MHz - 1 2 dB Input/Output VSWR at Fo - 1.5 2.25:1 Source Impedance - 50 - Load Impedance - 50 - Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Referenced to the insertion loss at center frequency Test Circuit: I/O I/O 50 50 Single-ended Single-ended 50 50 GND Input Output Subject to change or obsolescence without notice Rev B September 2013 Page 2 of 5