RFSW6232 RFSW6232 RFSW6232 General Purpose Differential 3T Switch 50MHz to 6000MHz Package: QFN, 18-pin, 2.0mm x 2.0mm The RFSW6232 is a Differential Three Throw Switch that offers very low insertion loss along with excellent linearity performance. Features It is ideal for filter switching to 6000MHz. The RFSW6232 is Very Low Insertion Loss and High Isolation compatible with +1.8V control logic and is packaged in a compact <0.5dB Insertion Loss 1GHz 2mm x 2mm, 18-pin, leadless QFN package which allows for a >20dB Isolation at 2.5GHz very small solution size and no requirements for external DC Typical blocking capacitors, unless external DC is applied to the device Power Handling to 36dBm ports. Low Phase Error+/-3 at 2GHz Multi-Band Operation 50MHz to 6000MHz HBM ESD Rating >2kV on All Ports QFN Package, 2mm x 2mm x 0.55mm, 18-Pin No DC Blocking Capacitors Required in Most Applications Applications Filter Switching Antenna Switching Differential Switching Functional Block Diagram Ordering Information RFSW6232SQ Sample bag with 25 pieces RFSW6232SR 7 Reel with 100 pieces RFSW6232TR7 7 Reel with 2500 pieces RFSW6232PCK-410 50MHz to 6000MHz PCBA with 5-piece sample bag RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150623 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, 1 of 9 trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc. RFSW6232 Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit V 3.9 V DD C , C 3.0 dBm TL1 TL2 RFMD Green: RoHS status based on EU +37.5 in 50, 25C Directive 2011/65/EU (at time of this document revision), halogen free per IEC +37 in 50, 90C 61249-2-21, < 1000ppm each of antimony Maximum Input Power - Momentary Infrequent Occurrence +34.5 in 50, 105C dBm trioxide in polymeric materials and red +32.5 in 6:1, 90C phosphorus as a flame retardant, and <2% antimony in solder. +30 in 6:1, 105C Exceeding any one or a combination of the Absolute +36 in 50, 25C Maximum Rating conditions may cause permanent +35.5 in 50, 90C damage to the device. Extended application of Absolute Maximum Input Power - Continuous Operation +33 in 50, 105C dBm Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or +31 in 6:1, 90C functional operation of the device under Absolute +28.5 in 6:1, 105C Maximum Rating conditions is not implied. Storage Temperature -65 to +150 C ESD Rating - Human Body Model (HBM) 2000 V Moisture Sensitivity Level MSL2 Recommended Operating Condition Specification Parameter Unit Min Typ Max Operating Temperature Range -40 25 +105 C Operating Junction Temperature 125 C Switch Supply Voltage 2.4 3.1 3.5 V Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max Nominal Conditions Unless Otherwise Stated, V = 2.7V, DD 900MHz Specifications V / V = 1.8V / 0V, Temp = 25C, 50, Single-ended HIGH LOW Frequency 900 MHz Insertion Loss (P1, P2 or P3 to PC) 0.36 0.5 dB 900MHz Isolation P1 to P2 or P3 25 28 dB 900MHz S1, S2, or S3 active P1, P2 or P3 to PC 25 38 dB 900MHz HI mode active Harmonics -100 P1, P2 or P3 to PC, 2F -85 dBc 0 -85 -98 dBc P = 26dBm, CW, 900MHz P1, P2 or P3 to PC, 3F IN 0 P1, P2 or P3 to PC, up to 2.75GHz -85 -103 dBc RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150623 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, 2 of 9 trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc.